GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1756-OB16IEF |
Series: | ControlLogix |
UPC: | 10885630081783 |
Description:
The ControlLogix 1756-OB16IEF is a DC digitally isolated, rapid peer-control output module from Allen-Bradley. The module has 16 independently separated outputs and is electronically fused and secured per-point
This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1756-OB16IEF module responds to system transition directives in less than 25 seconds. It also includes status indicators for displaying diagnostic and I/O statuses. Before attaching the module to the chassis, you'll need a or RTB. The 1756-TBS6H and 1756-TBCH are the only RTBs that are compatible This module features a failure feature as well as an additional feature that allows you to specify the amount of time before the module switches from on to off if an error occurs. The 1756-OB16IEF is a slave-only CIP Sync device that employs CIP Sync for timestamps and scheduling. As a result, another module is required to serve as the network's master clock. Configurable point-level output states, output data echo, isolated and non-isolated output module variations, different output point densities, electronic fusing, and a diagnostic information latch are among the other characteristics of the 1756-OB16IEF module The 1756-OB16IEF module has a 4 Amperes inrush pilot rating. It has a 12-24 Volts DC sink or source voltage category, a 10-30 Volts DC operational voltage range, a current draw of 3 milliamperes at 24 Volts and 320 milliamperes at 5.1Volts, and a total backplane power of 1.7 Watts. The PWM cycle time is 1 ms min/1 hour maximum, the PWM on-time is 200 s min/1 hour maximum, and the PWM on-time precision is more or less 20 s. The module's minimum load current per point is 1 mA, and its surge current per point is 4 A for 10 ms, repeating every 2 s. A continuous isolation voltage of 250V is also included. The maximum off-state leakage current per point in the module is 0.1 mA per point.
Question: Does Automation Stop offer repairs on the 1756-OB16IEF?
Answer: Yes. We offer repairs for the 1756-OB16IEF and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1756-OB16IEF?
Answer: If you buy the 1756-OB16IEF through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1756-OB16IEF online?
Answer: Yes. Automation Stop sells the 1756-OB16IEF online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1756-OB16IEF?
Answer: The 1756-OB16IEF is made by Allen Bradley - PLC.
Question: What type of product is the 1756-OB16IEF?
Answer: The 1756-OB16IEF is part of the ControlLogix series.
Question: What voltage is included with the 1756-OB16IEF?
Answer: The 1756-OB16IEF has a voltage of 10-30.
For additional information about 1756-OB16IEF check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-OB16IEF.
Revision Part # | Also Known As | Availability |
---|---|---|
1756-OB16IEF/A | 1756-OB16IEF Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.