GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1756-OB8EI |
Series: | ControlLogix |
Description:
The 1756-OB8EI is a ControlLogix Discrete output module that contains 8 sourcing output channels (non-isolated) that are electronically fused. The module, at 5 volts, has a backplane current of 250 milliamperes, while at 24 volts, the backplane current is 2 milliamperes. This device also requires RTB like the 1756-TBCH and 1756-TBS6H.
This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley manufactures the 1756-OB8EI, an isolated ControlLogix electronically fused unit. Electronically fused 8-point individually isolated outputs are included in the module. The 1756-OB8EI's operating voltage ranges from 12 to 24 Volts DC. It has a 10 to 30 Volt DC working voltage range and a maximum output current rating-point of 2 Amps at 60 degrees Celsius. The 1756-OB8EI has a maximum output current rating of 16 amps at 55 degrees Celsius and 10 amps at 60 degrees Celsius. At 60 degrees Celsius, the 1756-OB8EI has a maximum power dissipation of 4.7 Watts. It has a short trip of greater than 4.5 Ampere for a maximum of 500 seconds (output on, then short) and a long trip of greater than 4.5 Ampere for a maximum of 1.5 milliseconds (output on into short), with a diagnostics timestamp of +/- 1 millisecond. At 5.1 volts, it draws 250 milliamperes and at 24 volts, it draws 2 milliamperes. At 5 volts, the backplane current is 250 mA, while at 24 volts, the backplane current is 2 mA. The 1756-OB8EI also includes the 1756-TBCH and 1756-TBS6H, which are both removable terminal blocks. It features a continuous isolation voltage of 50 volts and can be installed in any chassis slot. The 1756-OB8EI has a maximum output delay of 1 minute from off to on, and a maximum output delay of 5 milliseconds between on and off. The 1756-OB8EI's suggested operating temperature range is 0 to 60 degrees Celsius, with a storage temperature range of -40 to 85 degrees Celsius. The 1756-OB8EI needs a high ambient air temperature of 60 degrees Celsius, with a relative humidity of 5% minimum and 95% maximum. Electronic fusing, a changeable point-level output state, variable output densities, and non-isolated output module variations are among the features of the 1756-OB8EI.
Question: Does Automation Stop offer repairs on the 1756-OB8EI?
Answer: Yes. We offer repairs for the 1756-OB8EI and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1756-OB8EI?
Answer: If you buy the 1756-OB8EI through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1756-OB8EI online?
Answer: Yes. Automation Stop sells the 1756-OB8EI online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1756-OB8EI?
Answer: The 1756-OB8EI is made by Allen Bradley - PLC.
Question: What type of product is the 1756-OB8EI?
Answer: The 1756-OB8EI is part of the ControlLogix series.
Question: What voltage is included with the Allen Bradley - PLC 1756-OB8EI?
Answer: The 1756-OB8EI by Allen Bradley - PLC has a voltage of 10-30.
For additional information about 1756-OB8EI check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-OB8EI.
Revision Part # | Also Known As | Availability |
---|---|---|
1756-OB8EI/A | 1756-OB8EI Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.