GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1756-PAR2 |
Series: | ControlLogix |
Description:
The 1756-PAR2 belongs to the ControlLogix redundant power supply kit. Allen-Bradley developed this power supply unit. Its configuration includes two (2) 1756-PA75R power sources and two (2) 1756-CPR2 connections cables, as well as a single 1756-PSCA2 chassis adapter module. The ControlLogix 1756-PSCA2 is a redundant power source chassis adapter with two independent power sources. Power from the installed pair of power supplies is condensed into a single power connection on the ControlLogix chassis backplane circuitry, which is achieved by the employment of a passive component.
This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley produced 1756-PAR2 is a ControlLogix-enabled packaged system. Using the 1756-PA75R with another power source with the same kind of electricity is recommended in this instance. A fail-safe power supply is ideal for essential applications that necessitate the least amount of downtime feasible. An eighty-five (85) to two hundred and sixty-four (264) volt AC voltage range and a forty-seven (47) to sixty-three (63) hertz frequency range are required to use the device. The highest output power of this power supply is 75 watts, with current capabilities of 1.5 amps at 1.2 volts direct current (DC), 4 amps at 3.3 volts direct current, 13 amps at 5.1 volts direct current, and 2.8 amps at 24 volts direct current. The 1756-CPR2 is a redundant power source cable that connects and synchronizes the two power supplies. This cable has a length of 0.91 meters (3 feet) and a minimum bend radius of 12.7 centimeters (5 inches). Users and control system designers can use this assembly to quickly configure redundant ControlLogix controller systems. It decreases the possibility of overlooking an item when selecting large or sophisticated control systems. The 1756-PAR2 power supply is simple to set up and use. A normal power supply must first be attached to one end of the frame. Then, attach it to the backplane with a screwdriver. Using the 1756-PAR2 ControlLogix-XT power supply, you may operate it in extremely hot or harsh environments. When utilized with the chassis adapter, a backup power source powers the backplane of such ControlLogix series B hardware.
Question: Does Automation Stop offer repairs on the 1756-PAR2?
Answer: Yes. We offer repairs for the 1756-PAR2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1756-PAR2?
Answer: If you buy the 1756-PAR2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1756-PAR2 online?
Answer: Yes. Automation Stop sells the 1756-PAR2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1756-PAR2?
Answer: The 1756-PAR2 is made by Allen Bradley - PLC.
Question: What type of product is the 1756-PAR2?
Answer: The 1756-PAR2 is part of the ControlLogix series.
Question: What voltage alternating current (VAC) does the 1756-PAR2 have?
Answer: The 1756-PAR2 includes a VAC (voltage alternating current) of 85-265.
For additional information about 1756-PAR2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-PAR2.
Revision Part # | Also Known As | Availability |
---|---|---|
1756-PAR2/A | 1756-PAR2 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.