GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1756-PBXT

✓ In Stock

1756-PBXT Image 1 thumbnail
1756-PBXT Image 2 thumbnail
1756-PBXT Image 3 thumbnail
1756-PBXT Image 4 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1756-PBXT
Series: ControlLogix

Description:

The 1756-PBXT is an Allen-Bradley power supply module that is included in the 1756 ControlLogix XT product series. It is rated for a maximum input power limit of 70 watts and produces 52 watts of output power. The input voltage range is between 18 volts and 32 volts DC with a nominal input voltage of 24 volts DC. The current capacity at 24 volts is 2.1 amperes. This power supply has an open-style enclosure and is mounted on the left side of a 1756 chassis.


This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.


Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$1,143.00

Available: 7

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$915.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1756-PBXT? We can help!

Request a Quote

Key Features:

  • has 32-140 fahrenheit (0-60 celsius) operating temperature

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1756-PBXT is a power supply module that is part of the 1756 ControlLogix XT power supply series. The module requires an input voltage from between 18 and 32 volts DC with a nominal input voltage of 24 Volts DC. This power supply is rated for a maximum input power of 70 watts and is able to generate a power output of 52 watts, if operating in a temperature range of -25 degrees to 70 degrees Celsius (-13 degrees to 158 degrees Fahrenheit). This module is rated for a maximum inrush current of 30 amperes and has a current capacity of 2.1 amperes at the 24 volt operating range. This power supply module is intended for usage in applications that may be used in extreme environments that have an environmental temperature range between -20 degrees to +70 degrees Celsius (-4 degrees to +158 degrees Fahrenheit) when used with FLEX I/O-XT components. When used independently, the ControlLogix-XT system is able to operate in environments where the temperature ranges from -25 degrees to +70 degrees Celsius (-13 degrees to +158 degrees Fahrenheit). This power supply is rated for an isolation voltage of 250 volts continuous with a reinforced isolation type. It has been tested to withstand a DC voltage of 3150 volts for up to one minute. This module is meant to be installed on the left side of a 1756 chassis. It has an approximate weight of 0.95 kilograms (2.1 pounds) and has approximate dimensions of 14.0 x 11.2 x 14.5 centimeters (5.51 x 4.41 x 5.71 inches).

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1756-PBXT?

Answer: Yes. We offer repairs for the 1756-PBXT and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1756-PBXT?

Answer: If you buy the 1756-PBXT through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1756-PBXT online?

Answer: Yes. Automation Stop sells the 1756-PBXT online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1756-PBXT?

Answer: The 1756-PBXT is made by Allen Bradley - PLC.


Question: What type of product is the 1756-PBXT?

Answer: The 1756-PBXT is part of the ControlLogix series.


Series information for 1756-PBXT

For additional information about 1756-PBXT check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-PBXT.

Revision Part # Also Known As Availability
1756-PBXT/A 1756-PBXT Ser A, Series A, Rev A Request a Quote
1756-PBXT/B 1756-PBXT Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 1756-P8XT
  • 175G-PBXT
  • 175G-P8XT
  • 17S6-PBXT
  • 17S6-P8XT
  • 17SG-PBXT
  • 17SG-P8XT
  • I756-PBXT
  • I756-P8XT
  • I75G-PBXT
  • I75G-P8XT
  • I7S6-PBXT
  • I7S6-P8XT
  • I7SG-PBXT
  • I7SG-P8XT

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP