GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1761-CBL-AM00 |
Series: | 1761 |
Description:
The 1761-CBL-AM00 by Allen-Bradley is a cable that connects AIC+ processors to Micro-Logix 1000 processors. It has an RS232 operational port, an 8pin Mini-DIN to 8pin Mini-DIN connector, and a length of 0.5 meters. It uses an RS-232 (8-pin mini-DIN) communication connector to link Micro-Logix 1000 processors to AIC+ interface converters. It does not require an external power source, and the "cable" setting on the selection switch is the default. It has no spacing restrictions except for the movement of the DIN-rail latch.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1761-CBL-AM00 is a communication cable for connection between AIC+ and MicroLogix 1000 series processors. It features an RS232 operating port, 8pin Mini-DIN to 8pin Mini-DIN, and it is 0.5 meters in length. It uses an RS232-8pin mini-DIN communication connector to connect MicroLogix 1000 processors to other devices like the Advanced Interface Converter Plus. It does not require an external power supply and its selection switch setting is "cable".
The following are the environmental classifications for this cable to be put in: Hazardous Environment, Class I, and Division 2. Furthermore, for horizontal mounting, this cable should be installed in a temperature range of +32 to +131 Fahrenheit, and +32 to +104 Fahrenheit for vertical mounting. When MicroLogix controllers are configured for DH-485 protocol, this cable via the AIC+, catalog number 1761-NET-AIC, allows them to establish a connection to a network like the DH485 network. To connect a DH485 network, you'll need the appropriate tools to strip the shielded cable and connect it to the AIC Plus with the cable and terminators. Two isolated RS-232 ports and one RS-485 port are available on the AIC+. The Advanced Interface Converter Plus is also able to serve as an RS232 isolator, adding a layer between it and the controller's communications port, and any connected equipment. Ensure that the 1761-CBL-AM00 linking the MicroLogix 1000 controller to the AIC Plus is not interfering with the door of the housing when placing it in a housing. This cable should only be installed in a housing, and it should be kept inside the housing or be safeguarded by conduit or other means. Wiring should be done in compliance with NEC articles 501 to 503, &/or CEC Section 18 - 1J2, if applicable.
Question: Does Automation Stop offer repairs on the 1761-CBL-AM00?
Answer: Yes. We offer repairs for the 1761-CBL-AM00 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1761-CBL-AM00?
Answer: If you buy the 1761-CBL-AM00 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1761-CBL-AM00 online?
Answer: Yes. Automation Stop sells the 1761-CBL-AM00 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1761-CBL-AM00?
Answer: The 1761-CBL-AM00 is made by Allen Bradley - PLC.
For additional information about 1761-CBL-AM00 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1761-CBL-AM00.
Revision Part # | Also Known As | Availability |
---|---|---|
1761-CBL-AM00/A | 1761-CBL-AM00 Ser A, Series A, Rev A | Request a Quote |
1761-CBL-AM00/B | 1761-CBL-AM00 Ser B, Series B, Rev B | Request a Quote |
1761-CBL-AM00/C | 1761-CBL-AM00 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.