GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1761-CBL-HM02 |
Series: | 1761 |
UPC: | 10662468489697 |
Description:
Allen- Bradley's RS 232 1761-CBL-HM02 operating-programming interface cable links port 2 on one Advanced Interface Converter+ to port 2 on another Advanced Interface Converter+. It has an RS-232 port, an 8 pin mini-DIN to 8 pin mini-DIN connector, and is 2 meters long. It must be maintained inside the enclosure or fastened in some way, such as with a conduit. Articles 501 to 503 of the N.E.C. and/or Section 18-1J2 of the C.E.C., if applicable, apply to all wiring.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1761-CBL-HM02 is a RS 232 operating/programming interface cable that connects from port 2 on an AIC+ to port 2 on another AIC+. It features an RS-232 port, 8 pin mini-DIN to 8 pin mini-DIN, and it measures 2 meters in length. If the AIC+ interface converter is operated by a MicroLogix controller attached to an RS232 (8-pin mini-DIN) com port using a 1761-CBL-HM02 or comparable cable, an external supply of power is needed. Its switch configuration selection is "external". The AIC+ interface converter can also be positioned horizontally or vertically. Excluding the motion of the DIN-rail clasp, there are no spacing restrictions. Multiple networks of devices can be connected with the AIC+ interface converter. It may also be used with a variety of SLC & MicroLogix control modules and peripherals. It powers MicroLogix 1000 controllers through the RS232 8-pin compact-DIN port wire. If a MicroLogix control module is not connected with this port, a 24 volts direct current power supply must be connected to the AIC's external power terminals.
For a specific arrangement, the selection switch for the direct current power supply should be enabled. The 8-pin compact-DIN is used by some devices to power the AIC+ interface converter. In case your using a 1746-P1 power supply or a 1746-P2 power supply, only the AIC+ should be connected to it. Furthermore, this cable must be housed in a container, and it must be kept inside the enclosure or secured with a conduit or other methods. N.E.C. articles 501 to 503, and/or C.E.C. Section 18-1J2, if applicable, apply to all wiring.
Region of Manufacture* | Taiwan |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 1761-CBL-HM02?
Answer: Yes. We offer repairs for the 1761-CBL-HM02 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1761-CBL-HM02?
Answer: If you buy the 1761-CBL-HM02 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1761-CBL-HM02 online?
Answer: Yes. Automation Stop sells the 1761-CBL-HM02 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1761-CBL-HM02?
Answer: The 1761-CBL-HM02 is made by Allen Bradley - PLC.
Question: What Region of Manufacture* does the Rockwell Automation 1761-CBL-HM02 have?
Answer: The Rockwell Automation 1761-CBL-HM02 has a Taiwan Region of Manufacture*.
For additional information about 1761-CBL-HM02 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1761-CBL-HM02.
Revision Part # | Also Known As | Availability |
---|---|---|
1761-CBL-HM02/A | 1761-CBL-HM02 Ser A, Series A, Rev A | Request a Quote |
1761-CBL-HM02/B | 1761-CBL-HM02 Ser B, Series B, Rev B | Request a Quote |
1761-CBL-HM02/C | 1761-CBL-HM02 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.