The 1761-L32AWA is a MicroLogix 1000 programmable controller manufactured by Allen Bradley/Rockwell Automation as part of the MicroLogix 1000 series. This unit operates on an input voltage of 120 volts AC or 240 volts AC, input signal of 120 volts AC and a relay output type. It should be operated or installed in non-hazardous environments or Class 1 Division 2 Groups A, B, C, and D for safety purposes. If the connectors are disconnected or connected on a live circuit, the controller may explode because it is not installed in an enclosure. The controller has approximated dimensions of 7.87 x 2.87 x 3.15 inches, and it is horizontally mounted. It is required that a minimum space of 2 inches is left on the top, bottom, as well as sides to enable free flow of air. Allen Bradley 1761-L32AWA controller features a 1K user memory, 12-point relay output, 20-point AC input, and an AC power supply controller. The unit is compact and features different communication options, including RS-232 port that connects it to a peer-to-peer network via the DH-485 network. There is also DeviceNet Interface (DNI) that enables fast response, reliable, and low-cost connections. Besides, the 1761-L32AWA programmable controller can be vertically mounted using the same mounting clearance like when it is horizontally mounted. The difference is that the nameplate will face down for vertical mounting. This device operates optimally at a minimum surrounding temperature range of 0 - 40 degrees Celsius. It has 9g operating shock rating 3 x 11 milliseconds peak acceleration for every axis when mounted on panel. On DIN rail, the 1761-L32AWA has an operating shock of 7g, 3 x 11 milliseconds peak acceleration in each direction.

The 1761-L32AWA MicroLogix 1000 programmable controller from Allen Bradley / Rockwell Automation has a power supply voltage that ranges from 85 to 264 volts AC at a frequency of 47 to 63 hertz. The power supply usage rating of this device is 19 volt-amperes at 120 volts AC and 25 volt-amperes at 240 volts AC. Additionally, the maximum inrush current for this controller's power supply is 30 amperes for a duration of 8 milliseconds. The Allen Bradley 1761-L32AWA programmable controller is estimated to operate properly at a minimum of 50,000 power cycles. The recommended terminal screw torque for this device is 0.9 Newton-meters (N-m), or the equivalent of 8.0 pound-inches (lb-in.), maximum. The isolation rating of this programmable controller is 1500 volts alternating current (AC). The response times for the AC inputs of this device include a nominal filter setting response time of 8.0 milliseconds, a maximum on delay of 20.0 milliseconds, and a maximum off delay of 20.0 milliseconds. 

The inputs of this controller have a voltage range of 79 to 132 volts AC at a frequency of 47 to 63 hertz. They have an on-voltage rating of 79 volts AC minimum and 132 volts AC maximum, while the off-voltage is rated at 20 volts AC. The on-current ratings of the inputs include 5.0 milliamperes minimum at 79 volts AC 47 hertz, 12.0 milliamperes nominal at 120 volts AC 60 hertz, and 16.0 milliamperes maximum at 132 volts AC 63 hertz. The off-current of the inputs are rated at 2.5 milliamperes maximum. The nominal impedance rating of this product's inputs is 12K ohms at 50 hertz or 10K ohms at 60 hertz. The maximum inrush current rating of the Allen Bradley 1761-L32AWA's inputs is 250 milliamperes.