GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Allen Bradley - PLC |
| Product Type: | PLC/Programmable Logic Controller |
| Part Number: | 1771-ID16 |
| Series: | PLC 5 |
| UPC: | 10612598115928 |
Description:
This digital AC/DC input module, which was manufactured by Allen-Bradley, has the part number 1771-ID16. This device is part of Allen-Bradley's PLC 5 series of products. This unit can operate in both AC and DC voltages. There are 16 inputs equipped to this device. This device has a voltage range of 74 to 138 volts AC, or 105 to 138 volts DC, at a 63 hertz frequency. This Allen-Bradley product has a nominal input voltage of 120 volts AC/DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a 1771-ID16? We can help!
Request a QuoteKey Features:
- is a digital ac/dc input module
- incorporates dimensions of 3.5 x 6.5 x 2.0 in (89 x 165 x 51 mm)
- is a i/o module type
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1771-ID16 is a digital AC/DC input module. This device, which was created by the Allen-Bradley company, is part of the PLC 5 series of Allen-Bradley products. This device is capable of operating with both AC (alternating current) and DC (direct current) voltages. This product is equipped with sixteen (16) inputs. The voltage range of this device is seventy-four (74) to one hundred and thirty-eight (138) volts alternating current (AC), or one hundred and five (105) to one hundred and thirty-eight (138) volts direct current (DC), at a forty-seven (47) to sixty-three (63) hertz (Hz) frequency range. The nominal input voltage of this Allen-Bradley device is 120 volts AC/DC. The on-state voltage minimum is 64 volts AC and 105 volts DC, while the on-state current minimum is 6.0 milliamperes at 74 volts AC at a frequency of 47 to 63 hertz. Additionally, the on-state current minimum is also 1.2 milliamperes at 105 volts DC. The off-state voltage maximum is 45 volts AC and 66 volts DC. The off-state current minimum is 4.0 milliamperes at 45 volts AC at a frequency of 47 to 63 hertz, and 0.8 milliamperes at 66 volts DC.
The Allen-Bradley 1771-ID16 has a rated power dissipation of 7.0 watts maximum and 0.3 watts minimum, while the thermal dissipation is 23.8 BTU/hr maximum and 1.0 BTU/hr minimum. The backplane current of this product is 75 milliamperes maximum. When operating this product, a temperature range of 32 to 140 degrees Fahrenheit should be kept. When storing this product, a temperature range of -40 to 185 degrees Fahrenheit should be maintained. The relative humidity should remain between 5% and 95% with no condensation.
Technical Specifications
| Type | I/O Module |
FAQ
Question: Does Automation Stop offer repairs on the 1771-ID16?
Answer: Yes. We offer repairs for the 1771-ID16 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-ID16?
Answer: If you buy the 1771-ID16 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-ID16 online?
Answer: Yes. Automation Stop sells the 1771-ID16 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-ID16?
Answer: The 1771-ID16 is made by Allen Bradley - PLC.
Question: What type of product is the 1771-ID16?
Answer: The 1771-ID16 is part of the PLC 5 series.
Series information for 1771-ID16
For additional information about 1771-ID16 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-ID16.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 1771-ID16/A | 1771-ID16 Ser A, Series A, Rev A | Request a Quote |
| 1771-ID16/B | 1771-ID16 Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
- 1771-ID1G
- 1771-IDI6
- 1771-IDIG
- 1771-1D16
- 1771-1D1G
- 1771-1DI6
- 1771-1DIG
- 177I-ID16
- 177I-ID1G
- 177I-IDI6
- 177I-IDIG
- 177I-1D16
- 177I-1D1G
- 177I-1DI6
- 177I-1DIG
- I771-ID16
- I771-ID1G
- I771-IDI6
- I771-IDIG
- I771-1D16
- I771-1D1G
- I771-1DI6
- I771-1DIG
- I77I-ID16
- I77I-ID1G
- I77I-IDI6
- I77I-IDIG
- I77I-1D16
- I77I-1D1G
- I77I-1DI6
- I77I-1DIG
