GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1771-NBSC

✓ In Stock

1771-NBSC Image 1 thumbnail
1771-NBSC Image 2 thumbnail
1771-NBSC Image 3 thumbnail
1771-NBSC Image 4 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1771-NBSC
Series: PLC 5

Description:

This I/O module belongs to the N series from the 1771 product line. This device was designed and manufactured by Allen Bradley / Rockwell Automation. This module has six inputs and two outputs. In addition, this I/O module draws a backplane current rating of 3 amperes. It supports BDC and natural binary data formats. This module is compatible with the 1771-WH wiring arm unit. This device has a 16-bit resolution over a current range of 0 to 20 milliamperes.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$3,325.00

Available: 9

What is Refurbished

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1771-NBSC is an I/O module from the 1771 N-Series Analog I/O Module product family. It is an Allen Bradley/ Rockwell Automation product, and it belongs to the Bulletin 1771 series of products. It has 6 inputs and two outputs in total. This device has a 16-bit resolution that provides 65535 counts over a current range of 0 to 20 milliamperes. This I/O module has 2 outputs. Theses outputs have a current range of 0 to 25 milliamperes, with a 3.2-micro ampere per bit output resolution rate. The maximum current that this I/O device can draw is 2.6 amperes. Additionally, the power dissipation rate of this module is 13 watts. This Allen Bradley device is capable of being used with other devices from Allen Bradley, such as PLC 3, PLC 5, and more. 

The RTP selection is compatible with the 1771-RTP5 unit. The backplane current rating of this unit is 3.0 amperes. Its data format type is either neutral binary or BDC. Both of these data formats are accepted on this I/O module. Moreover, its typical signal delay-off range is 45 (+/- 15) milliseconds for the AC power source. In comparison, its DC signal delay-off range is 50 milliseconds only. It is also important to note that the current status of this I/O module is categorized as an earlier model. Before removing or mounting it into the I/O chassis, its power should be switched off to comply with the manufacturers' safety recommendations. Similarly, the environmental conditions for this unit must comply with the industry's stated directives.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1771-NBSC?

Answer: Yes. We offer repairs for the 1771-NBSC and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1771-NBSC?

Answer: If you buy the 1771-NBSC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1771-NBSC online?

Answer: Yes. Automation Stop sells the 1771-NBSC online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1771-NBSC?

Answer: The 1771-NBSC is made by Allen Bradley - PLC.


Question: What type of product is the 1771-NBSC?

Answer: The 1771-NBSC is part of the PLC 5 series.


Series information for 1771-NBSC

For additional information about 1771-NBSC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-NBSC.

Revision Part # Also Known As Availability
1771-NBSC/A 1771-NBSC Ser A, Series A, Rev A Request a Quote
1771-NBSC/B 1771-NBSC Ser B, Series B, Rev B Request a Quote
1771-NBSC/C 1771-NBSC Ser C, Series C, Rev C Request a Quote

Common Misspellings:

  • 1771-NB5C
  • 1771-N8SC
  • 1771-N85C
  • 177I-NBSC
  • 177I-NB5C
  • 177I-N8SC
  • 177I-N85C
  • I771-NBSC
  • I771-NB5C
  • I771-N8SC
  • I771-N85C
  • I77I-NBSC
  • I77I-NB5C
  • I77I-N8SC
  • I77I-N85C

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP