GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1771-NC6

✓ In Stock

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1771-NC6
Series: PLC 5

Description:

The 1771-NC6 is a data connection cable that is manufactured by Allen-Bradley/Rockwell Automation. It has a length of 6 feet (1.8 meters). It has an analog data type and is isolated to prevent signal degradation and short circuits. The cable is compatible with programmable logic controller (PLC) devices, analog modules, remote terminal panels (RTP), and removable terminal blocks (RTB). Cables in this series include 15 feet long models.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$76.00

Available: 26

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$61.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1771-NC6? We can help!

Request a Quote

Key Features:

  • is a remote termination panels and cables

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1771-NC6 is a connection cable that is compatible with programmable logic controllers made by Allen Bradley/Rockwell Automation. This cable is included in Series N, and is an analog type cable. It allows a high resolution and isolated connection between PLC devices. The length of this cable is 6 feet (1.8 meters). This component can be used to connect PLC devices to remote terminal panels (RTP). It supports PLC 5 / 250, PLC 3, and PLC 5 controllers as well as analog I/O modules. The approximate weight of this component is 0.3 kilograms (0.66 pounds). This cable contains 25 pin connectors on either end. It supports four channel and eight channel data transfer to PLCs. Supported RTP that are compatible with this cable have the part numbers 1771-RTP1, the 1771-RTP2, and 1771-RTP4. Two 1771-NC6 cables are required when connecting to each RTP. The cable can also be used to connect to modules with the part numbers 1771-RT41 and 1771-RT44. These modules only require one 1771-NC6 cable for a 4 channel connection to an I/O module included in the 1771-N series. The cable includes protection against external signal and electrical noise in order to improve the quality of the signal that is being transmitted and prevent extraneous signals. One end of the cable has a connector that can be used to attach to a 1771-RTP directly. The other end can be connected to a 1756 removable terminal block (RTB) in order to create a connection to an I/O module included in the ControlLogix series.

Technical Specifications

Region of Manufacture* United States
Type Analog Cable

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1771-NC6?

Answer: Yes. We offer repairs for the 1771-NC6 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1771-NC6?

Answer: If you buy the 1771-NC6 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1771-NC6 online?

Answer: Yes. Automation Stop sells the 1771-NC6 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1771-NC6?

Answer: The 1771-NC6 is made by Allen Bradley - PLC.


Question: What type of product is the 1771-NC6?

Answer: The 1771-NC6 is part of the PLC 5 series.


Question: What Region of Manufacture* does the Allen Bradley-Rockwell Automation 1771-NC6 have?

Answer: The 1771-NC6 has a United States Region of Manufacture*.


Series information for 1771-NC6

For additional information about 1771-NC6 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-NC6.

Revision Part # Also Known As Availability
1771-NC6/A 1771-NC6 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1771-NCG
  • 177I-NC6
  • 177I-NCG
  • I771-NC6
  • I771-NCG
  • I77I-NC6
  • I77I-NCG

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP