GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-NT2 |
Series: | PLC 5 |
Description:
The Allen Bradley 1771-NT2 is a high-resolution isolated analog module. This module has 8 individually isolated input channels. It also has 16-bit resolution. This module can withstand an isolation voltage rated up to 1000 volts DC. This device has a maximum backplane current of 1.5 amperes at 5 volts, as well as a maximum power dissipation rating of 5.0 watts at 5 volts. This module should be operated in an area where the temperature ranges from 0 to 60 degrees Celsius.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1771-NT2 is a high-resolution isolated analog module. This module was designed and produced by the company known as Allen Bradley / Rockwell Automation. This module belongs to the Bulletin 1771 product line. It has a total of eight (8) individually isolated input channels. This module may be attached to any slot of an I/O chassis module. Additionally, this module only takes up a single slot. This Allen Bradley module has a 16-bit resolution. The input filtering of this device consists of a six (6)-pole, low pass hardware filter. This Allen Bradley 1771-NT2 high-resolution isolated analog module was designed to withstand an isolation voltage rated up to 1000 volts direct current (DC) when operating continuously. The Allen Bradley 1771-NT2 has a maximum backplane current rated as 1.5 amperes at 5 volts. Additionally, it has a maximum power dissipation of 5.0 watts at 5 volts.
The Allen Bradley 1771-NT2 high-resolution isolated analog module should be operated within an environment where the temperature ranges from 0 to 60 degrees Celsius, or the equivalent temperature range of 32 to 140 degrees Fahrenheit. Additionally, when this module is not being operated, or needs to be stored, the temperature of the surrounding area should range from -40 to 85 degrees Celsius, or -40 to 185 degrees Fahrenheit. The suitable relative humidity ratings for this high-resolution isolated analog module should range from five (5) percent to ninety-five (95) percent, and it should be non-condensing. This Allen Bradley module can withstand an operating shock rated up to 30 G, as well as a non-operating shock rated up to 50 G.
Question: Does Automation Stop offer repairs on the 1771-NT2?
Answer: Yes. We offer repairs for the 1771-NT2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-NT2?
Answer: If you buy the 1771-NT2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-NT2 online?
Answer: Yes. Automation Stop sells the 1771-NT2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-NT2?
Answer: The 1771-NT2 is made by Allen Bradley - PLC.
Question: What type of product is the 1771-NT2?
Answer: The 1771-NT2 is part of the PLC 5 series.
For additional information about 1771-NT2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-NT2.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-NT2/A | 1771-NT2 Ser A, Series A, Rev A | Request a Quote |
1771-NT2/B | 1771-NT2 Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.