GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-OBDS |
Series: | PLC 5 |
Description:
Designed and manufactured by Allen Bradley, part number 1771-OBDS is a digital output module. This module is a part of the PLC 5 series of products that were manufactured by Allen Bradley. This device has a total of 16 output points. It has a maximum on-state voltage drop of 1.5 volts. The maximum off-state leakage current per output point is rated at 0.5 milliamperes. The maximum power dissipation rating of this device is 14 watts, while the maximum thermal dissipation rating is 47.8 BTU/hr.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Product number 1771-OBDS is a digital output module that belongs to the PLC 5 series of products that were designed and manufactured by Allen Bradley / Rockwell Automation. This is a current limiting type of output module. This module has a total of sixteen (16) output points. This module has a maximum on-state voltage drop rated at 1.5 volts. Additionally, it has a maximum off-state leakage current per output point rated at 0.5 milliamperes. The voltage category for this module is 10 to 60 volts direct current (DC). In addition to that, that operating voltage range of this output module is 10 to 40 volts direct current (DC). The Allen Bradley 1771-OBDS digital output module has a maximum power dissipation rating of 14 watts, while the minimum power dissipation rating is 2 watts. This module also has a maximum thermal dissipation rating of 47.8 BTU/hr, as well as a minimum thermal dissipation rating of 6.9 BTU/hr. The isolation voltage of this output module is rated at 500 volts for a 60-second duration. It has an ESD immunity of 4 kilovolts. Additionally, this product can withstand an air discharge rated at 8 kilovolts. This output module is equipped with an open-type enclosure that has a conformal coating. When operating this device, it is important that the temperature of the surrounding area ranges from 0 to 60 degrees Celsius, or the equivalent temperature range of 32 to 140 degrees Fahrenheit. Additionally, when this output module is not being operated, or is being stored, the temperature of the surrounding area should range from -40 to 85 degrees Celsius, or -40 to 185 degrees Fahrenheit.
Question: Does Automation Stop offer repairs on the 1771-OBDS?
Answer: Yes. We offer repairs for the 1771-OBDS and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-OBDS?
Answer: If you buy the 1771-OBDS through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-OBDS online?
Answer: Yes. Automation Stop sells the 1771-OBDS online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-OBDS?
Answer: The 1771-OBDS is made by Allen Bradley - PLC.
Question: What type of product is the 1771-OBDS?
Answer: The 1771-OBDS is part of the PLC 5 series.
Question: What voltage does the 1771-OBDS have?
Answer: The 1771-OBDS by Allen Bradley - PLC has a voltage of 10-20.
For additional information about 1771-OBDS check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-OBDS.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-OBDS/A | 1771-OBDS Ser A, Series A, Rev A | Request a Quote |
1771-OBDS/B | 1771-OBDS Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.