GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-OQ16 |
Series: | PLC 5 |
UPC: | 10612598115959 |
Description:
The 1771?OQ16 is a digital module. It is a type of Series C output module. Additionally, the 1771?OQ1 module is a PL5 series control system. The 1771?OQ16 comes with high compatibility with the 1771 I/O chassis. However, there are a few I/O chassis that will not work with this output module. This module is perfect for most Input/Output chassis. Moreover, the 1771?OQ1 has reliable hardware and an overall durable design. The operating voltage range for this device is 10 to 32 volts DC. The maximum power rating for this module is 32 amperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1771-OQ16 is a 24-volt DC isolated output module. It is part of the 1771 digital direct current (DC) output modules for PLC-5 Systems. The 1771-OQ16 houses a total of sixteen different outputs. All the 16 outputs either fall into the sink or source voltage category. It features an operating voltage bracket from 10 to 32 volts direct current. The 1771-OQ16 has a maximum power of 32 amperes. The 1771-OQ16 has a compact and modular design. Furthermore, with modular design also helps with cost-effective installations.
The 1771-OQ16 output is manufactured to operate with direct current output devices and other relays modules. It comes with a total of 18 different LED indicators. Among the 18, 16 LEDs are used for displaying the output status. One of them is used for notifying users about blown fuses. Additionally, there is the indicator that tells when the module is active and running. An “on” signal communicated among the system backplane, and the industrial module. When this happens, the module triggers the corresponding LEDs to light up. The 1771-OQ16 can be setup into the 1771-AM2, -AM1, and any I/O chassis from the 1771 line. However, it cannot be paired with the 1771-A1, -A2, and -A4 chassis.
The 1771-OQ16 can be plugged into any chassis slot. However, the chassis slot at the farthest left side is exclusively meant to be used with processors & adapters. The place between the pins 22 and 24 is where you should plug in the keying bands. It can also be placed inside the pins numbered 32 and 24. Users must always use the correct key number to avoid damaging the module. Furthermore, the correct key is required to avoid possible system faults.
Type | Point I/O |
Question: Does Automation Stop offer repairs on the 1771-OQ16?
Answer: Yes. We offer repairs for the 1771-OQ16 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-OQ16?
Answer: If you buy the 1771-OQ16 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-OQ16 online?
Answer: Yes. Automation Stop sells the 1771-OQ16 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-OQ16?
Answer: The 1771-OQ16 is made by Allen Bradley - PLC.
Question: What type of product is the 1771-OQ16?
Answer: The 1771-OQ16 is part of the PLC 5 series.
For additional information about 1771-OQ16 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-OQ16.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-OQ16/A | 1771-OQ16 Ser A, Series A, Rev A | Request a Quote |
1771-OQ16/B | 1771-OQ16 Ser B, Series B, Rev B | Request a Quote |
1771-OQ16/C | 1771-OQ16 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.