GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-OVN |
Series: | PLC 5 |
UPC: | 10612598003287 |
Description:
Part number 1771-OVN is a DC output module that was produced by Allen Bradley / Rockwell Automation. This module has a voltage rating of 10 to 30 volts DC. There are a total of 32 outputs within this device that are divided into 4 groups of 8. This module has an isolation rating of 1500 volts rms. This device has a minimum power dissipation rating of 1.7 watts, as well as a maximum power dissipation rating of 13.7 watts. The backplane current of this module is rated at 330 milliamperes at 5 volts DC maximum.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
An Allen Bradley product, the 1771-OVN is an output module designed specifically for direct current (DC) outputs. The Allen-Bradley 1771-OVN DC output module belongs Bulletin 1771 series of products. This DC output module has a voltage rating of 10 volts DC to 30 volts DC. The Allen Bradley 1771-OVN output module has a total of thirty-two (32) outputs. These outputs are divided into four (4) groups of eight (8) outputs each. The isolation voltage of this module is 1500 volts rms. The maximum output current rating of this device is 0.5 amperes per output, meaning that the maximum output current rating per group is 2 amperes. The maximum surge current of this output module consists of 2 amperes per output for 10 milliseconds, 5 amperes per output group for 10 milliseconds, and 20 amperes per module for 10 milliseconds. These ratings are repeatable every 2 seconds. The Allen Bradley 1771-OVN output module has a maximum on-state voltage drop of 1.5 volts DC at the rated output current. It also has a maximum off-state leakage current of 1.0 milliampere at 55 degrees Celsius. This device has a power dissipation rating of 1.7 watts minimum and 13.7 watts maximum. The thermal dissipation rating of this output module is 5.7 BTU/hr minimum and 46.7 BTU/hr maximum. It has a backplane current of 330 milliamperes at 5 volts DC maximum. This module should be operated in an area where the temperature ranges from 0 to 60 degrees Celsius. Additionally, when storing this module, the temperature should range from -40 to 85 degrees Celsius.
Question: Does Automation Stop offer repairs on the 1771-OVN?
Answer: Yes. We offer repairs for the 1771-OVN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-OVN?
Answer: If you buy the 1771-OVN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-OVN online?
Answer: Yes. Automation Stop sells the 1771-OVN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-OVN?
Answer: The 1771-OVN is made by Allen Bradley - PLC.
Question: What type of product is the 1771-OVN?
Answer: The 1771-OVN is part of the PLC 5 series.
Question: What can I expect the voltage included with the 1771-OVN to be?
Answer: The Allen Bradley - PLC 1771-OVN includes a voltage of 10-30.
For additional information about 1771-OVN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-OVN.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-OVN/A | 1771-OVN Ser A, Series A, Rev A | Request a Quote |
1771-OVN/B | 1771-OVN Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.