GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-RTP1 |
Series: | PLC 5 |
Description:
Designed and produced by Allen Bradley / Rockwell Automation, part number 1771-RTP1 is a remote termination panel and cable. This product belongs to the PLC-5 series of products. It was designed to be used with the 1771-N series of I/O modules. This product has a total of 8 analog inputs and 8 analog outputs. The Allen Bradley 1771-RTP1 was designed to be mounted via a DIN 1 or DIN 3 mounting rail. It has physical dimensions that measure 75 mm x 135 mm x 58 mm. the approximate weight of this product is 0.3 kilograms.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Product number 1771-RTP1 is a remote termination panel and cable. This product was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This product belongs to the PLC-5 product line. The Allen Bradley 1771-RTP1 has cold junction compensation for thermocouples. This product can be used for voltage inputs as long as it is used in tandem with a resistor. This Allen Bradley product was designed to be used with the 1771-N series of I/O (input / output) modules. The Allen Bradley 1771-RTP1 remote termination panel and cable has a total of eight (8) analog inputs, as well as eight (8) analog outputs. This product was designed to be mounted via a DIN 1 mounting rail or a DIN 3 mounting rail. When operating this Allen Bradley remote termination panel and cable, the temperature of the surrounding area should range from thirty-two (32) degrees Fahrenheit to one hundred and forty (140) degrees Fahrenheit, or the equivalent temperature range of zero (0) degrees Celsius to sixty (60) degrees Celsius. Additionally, when this product is being stored, the temperature of the surrounding area should range from negative forty (-40) degrees Fahrenheit to one hundred and eighty-five (185) degrees Fahrenheit, or negative forty (-40) degrees Celsius to eighty-five (85) degrees Celsius. The Allen Bradley 1771-RTP1 remote termination panel and cable has physical dimensions that measure 75 millimeters x 135 millimeters x 58 millimeters, or 3.0 inches x 5.3 inches x 2.3 inches. Additionally, this Allen Bradley product has an approximate weight of 0.3 kilograms, or the equivalent of 0.6 pounds.
Question: Does Automation Stop offer repairs on the 1771-RTP1?
Answer: Yes. We offer repairs for the 1771-RTP1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-RTP1?
Answer: If you buy the 1771-RTP1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-RTP1 online?
Answer: Yes. Automation Stop sells the 1771-RTP1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-RTP1?
Answer: The 1771-RTP1 is made by Allen Bradley - PLC.
Question: What type of product is the 1771-RTP1?
Answer: The 1771-RTP1 is part of the PLC 5 series.
For additional information about 1771-RTP1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-RTP1.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-RTP1/A | 1771-RTP1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.