GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1783-BMS10CGN |
Series: | 1783 |
Description:
The 1783-BMS10CGN is an Allen Bradley's Stratix 5700 Ethernet managed switch. The module has a total of ten ports, including eight fast Ethernet ports and two Gigabit Ethernet Combo ports. The vibration rating of this module is 2 G at 10 to 500 Hz. This device can withstand an operating shock of up to 30 G, as well as a non-operating shock of up to 55 G. This device has a peak current rated at 0.5 to 2 amperes at 12 to 48 volts DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1783-BMS10CGN was designed and manufactured by Allen Bradley as a Stratix 5700 Ethernet-managed switch. This Allen Bradley device features a total of ten (10) ports, including eight (8) fast Ethernet ports and two (2) Gigabit Ethernet Combo ports. Furthermore, this switch reaches the peak current of 0.5 to two (2) amperes at twelve (12) to forty-eight (48) volts of direct current, Class two/SELV, and this device also uses up fifteen (15) watts at twenty-four (24) volts direct current at forty (40) degrees Celsius. The peak power consumption of this device is twenty (20) watts. The device is type tested at 850 volts direct current for sixty (60) seconds and has basic insulation and no isolation between individual Ethernet ports and no isolation between console port and system. This Allen Bradley produced switch has an open-type enclosure and a T4 temperature code rating for both the North American and IEC temperature codes. Moreover, this switch operates at a temperature range of forty (40) to sixty (60) degrees Celsius. The ideal temperature for this switch ranges from negative forty (-40) to eighty-five (85) degrees Celsius, with a humidity rating of five (5) to ninety-five (95) percent with no condensation. This module is also categorized as Emissions Class A and possesses ESD immunity to contact discharges of eight (8) kilovolts and air discharges of fifteen (15) kilovolts. This device has a weight of approximately 1.38 kilograms. The module has a vibration rating of 2 G at 10 to 500 hertz, with a 30 G operational shock rating and a 55 G non-operating shock rating.
Question: Does Automation Stop offer repairs on the 1783-BMS10CGN?
Answer: Yes. We offer repairs for the 1783-BMS10CGN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1783-BMS10CGN?
Answer: If you buy the 1783-BMS10CGN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1783-BMS10CGN online?
Answer: Yes. Automation Stop sells the 1783-BMS10CGN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1783-BMS10CGN?
Answer: The 1783-BMS10CGN is made by Allen Bradley - PLC.
For additional information about 1783-BMS10CGN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1783-BMS10CGN.
Revision Part # | Also Known As | Availability |
---|---|---|
1783-BMS10CGN/A | 1783-BMS10CGN Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.