GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1783-BMS20CA |
Series: | 1783 |
Description:
The Allen-Bradley 1783-BMS20CA is a state-of-the-art Ethernet switch that is used in conjunction with controller modules in automation systems. The device requires an input power supply of direct current with a voltage ranging from 12 volts to 48 volts.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1783-BMS20CA is a versatile Ethernet switch that can be used to enhance the control and communication capabilities of an industrial automation system. The switching device is equipped with a total of 20 Ethernet ports that make the control system far more accessible and improve the performance characteristics of the system. The device functions on a stable input power supply of direct current with a voltage rating ranging from 12 volts to 48 volts. At a nominal voltage of 24 volts of direct current, the switching device displays optimum performance characteristics and is able to communicate with control modules within the automation system. The switching device weighs a total of 4.5 pounds and does not require a conformal coating. The device is also equipped with a configurable NAT router and can communicate with remote I/O devices to create a pleasant experience for the user.
The Allen-Bradley 1783-BMS20CA can be configured to function over a robust Ethernet/IP network and does not need to be mounted within a specific enclosure. The switching device has both communication ports and power ports and each port needs to be electrically isolated to protect the device from damage caused by electrical noise produced by other power sources within the industrial automation system. The device also has a fault detection system that enables the user to effectively troubleshoot issues with the switching device and identify solutions to optimize the performance of the system. The device has a maximum power consumption rating of 30 watts and can operate in a variety of industrial conditions.
Brand: | Allen-Bradley / Rockwell Automation |
Series: | Stratix 5700 Ethernet Managed Switches |
Part Number: | 1783-BMS20CA |
Total Ports: | 20 |
RJ45 Ports: | 16 FE |
Combo Ports: | 2 FE |
SFP Slots: | 2 FE |
PoE/PoE+ Ports: | None |
CIP Sync: | No |
NAT: | No |
DLR: | Yes |
Conformal Coating: | No |
Weight: | 4.5 lb |
Input Voltage: | 12-48V DC |
Question: Does Automation Stop offer repairs on the 1783-BMS20CA?
Answer: Yes. We offer repairs for the 1783-BMS20CA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1783-BMS20CA?
Answer: If you buy the 1783-BMS20CA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1783-BMS20CA online?
Answer: Yes. Automation Stop sells the 1783-BMS20CA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1783-BMS20CA?
Answer: The 1783-BMS20CA is made by Allen Bradley - PLC.
Question: What Brand: is included with the 1783-BMS20CA?
Answer: The 1783-BMS20CA has a AB / Rockwell Automation Brand:.
Question: Does the 1783-BMS20CA have a CIP Sync:?
Answer: No.
Question: What Combo Ports: does the 1783-BMS20CA have?
Answer: The Combo Ports: of the 1783-BMS20CA is 2 FE.
Question: Does the 1783-BMS20CA have a Conformal Coating:?
Answer: No.
Question: Does the 1783-BMS20CA have a DLR:?
Answer: Yes.
Question: What Input Voltage: does the 1783-BMS20CA have?
Answer: The Input Voltage: of the Allen Bradley 1783-BMS20CA is 12-48 volts DC.
Question: Does the Rockwell-Automation 1783-BMS20CA have a NAT:?
Answer: No.
Question: What is the unit Number: of the 1783-BMS20CA?
Answer: The unit Number: of the Rockwell Automation 1783-BMS20CA is 1783-BMS20CA.
Question: Does the 1783-BMS20CA have a power over ethernet (POE)/power over ethernet (POE)+ Ports:?
Answer: None.
Question: What RJ45 Ports: does the Allen Bradley-Rockwell Automation 1783-BMS20CA have?
Answer: The RJ45 Ports: of the Allen Bradley-Rockwell Automation 1783-BMS20CA is 16 FE.
Question: What is the Series: of the 1783-BMS20CA?
Answer: The Series: of the Allen-Bradley 1783-BMS20CA is Stratix 5700 Ethernet Managed Switches.
Question: What is the small form-factor pluggable transceiver (SFP) Slots: of the 1783-BMS20CA?
Answer: The small form-factor pluggable transceiver (SFP) Slots: of the 1783-BMS20CA is 2 FE.
Question: What is the Total Ports: of the 1783-BMS20CA?
Answer: The 1783-BMS20CA has a Total Ports: of 20.
Question: What is the Weight: of the 1783-BMS20CA?
Answer: The Weight: of the 1783-BMS20CA is 4.5 lb.
For additional information about 1783-BMS20CA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1783-BMS20CA.
Revision Part # | Also Known As | Availability |
---|---|---|
1783-BMS20CA/A | 1783-BMS20CA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.