GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1783-HMS8T4CGN |
Series: | 1783 |
Description:
Part number 1783-HMS8T4CGN is a Stratix Ethernet managed switch. This switch was designed and produced by Allen Bradley / Rockwell Automation. It has layer 2 switching and layer 3 routing with a total number of 12 ports. These ports are divided into 8 FE RJ45 ports and 4 GE combo ports. This switch has a rated power consumption of 35 watts. The alarm relay of this device is 1 amperes at 30 volts DC and 0.5 amperes at 48 volts DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1783-HMS8T4CGN is an industrial switch device that was manufactured by Allen Bradley / Rockwell Automation. It belongs to the Stratix 5400 series of Ethernet managed switches. This series of switches supports layer 2 switching for heavy industry applications, requiring dual ring architectures. They also support and layer 3 routing, providing networks better performance and increased protection. The 1783-HMS8T4CGN unit has a total of 12 ports available, in which 8 of these ports are RJ45 ports, type FE (Fast Ethernet) and the remaining 4 ports are GE (Gigabit Ethernet) combo ports. The module does not have PoE and PoE+ ports. The unit has event sequencing CIP Sync (IEEE 1588), providing real-time performance. It has Network Address Translation (NAT) for IP transfer private to public security and the Device Level Ring (DLR) feature for managing single faults.
The device has an alarm relay of 1 ampere when used at 30 volts DC and 0.5 amperes when used at 48 volts DC. This device's maximum power input is rated at 3.7 amperes, with a rated voltage range of 12 to 54 volts DC. This unit has a power consumption rating of 35 watts when used at 24 volts DC in a surrounding temperature of 40 degrees Celsius, or the equivalent of 104 degrees Fahrenheit. This device uses different wire sizing for connection to ground, power, and alarm. For ground connection, a 4 square millimeters (10 AWG) stranded or solid copper wire should be considered. In case of DC power connection, a 0.82 to 0.52 square millimeters (18…20 AWG) stranded or solid copper wire should be considered when used at 30 degrees Celsius (86 degrees Fahrenheit). For alarm connection, a 0.5 to 0.8 square millimeters (20 - 18 AWG) solid or stranded wire should be applied.
Question: Does Automation Stop offer repairs on the 1783-HMS8T4CGN?
Answer: Yes. We offer repairs for the 1783-HMS8T4CGN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1783-HMS8T4CGN?
Answer: If you buy the 1783-HMS8T4CGN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1783-HMS8T4CGN online?
Answer: Yes. Automation Stop sells the 1783-HMS8T4CGN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1783-HMS8T4CGN?
Answer: The 1783-HMS8T4CGN is made by Allen Bradley - PLC.
For additional information about 1783-HMS8T4CGN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1783-HMS8T4CGN.
Revision Part # | Also Known As | Availability |
---|---|---|
1783-HMS8T4CGN/A | 1783-HMS8T4CGN Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.