GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1784-PCM6 |
Series: | 1784 |
UPC: | 10612598169457 |
Description:
The Allen-Bradley 1784-PCM6 is a communication cable assembly. The cable is 10 feet (3.16 meters) long and has an 8-pin connector. It is compatible with 1784-PCMK cards and is used to connect them to computers using DH+ protocol.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This is the Allen-Bradley 1784-PCM6 communication cable assembly. This cable has a length of 10 feet and features an 8-pin connector. It is compatible with 1784-PCMK cards. The 1784-PCM6 cable is required when the following Allen-Bradley components are used: SLC 5/04 Processors and PLC-5 Enhanced Processors, ControlNet PLC-5 Family Processors, and ControlLogix 1756-DHRIO modules. The length from the PCMK card connector to the pod is 17.8 centimeters (7 inches). The length of the cable from the pod to the processor is 2.8 meters (9.2 feet). The manufacturer recommends that the total length of the communication cable should not be more than 10 meters (32.8 feet). Two wedges are provided along with this cable and are used to attach the cable to the computer. The wedges are provided in order to relieve pressure on the cable and ensure a secure connection to the computer. Not using the provided wedges increases the chances of accidental disconnection. Accidental disconnection during operation could damage the connector between the cable and the 1784-PCMK card. A loopback connector is not provided with the 1784-PCM6 cable. When performing a loopback diagnosis, it should be ensured that a 1784-PCMK card is connected in order to have a valid test.
Question: Does Automation Stop offer repairs on the 1784-PCM6?
Answer: Yes. We offer repairs for the 1784-PCM6 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1784-PCM6?
Answer: If you buy the 1784-PCM6 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1784-PCM6 online?
Answer: Yes. Automation Stop sells the 1784-PCM6 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1784-PCM6?
Answer: The 1784-PCM6 is made by Allen Bradley - PLC.
For additional information about 1784-PCM6 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1784-PCM6.
Revision Part # | Also Known As | Availability |
---|---|---|
1784-PCM6/A | 1784-PCM6 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.