GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Allen Bradley - PLC |
| Product Type: | PLC/Programmable Logic Controller |
| Part Number: | 1791-8BC |
| Series: | 1791 Block I/O |
| UPC: | 10612598127082 |
Description:
The Allen Bradley 1791-8BC is an I/O module with 8 inputs and 8 outputs. It is a complete independent compact block with power supply, processor and I/O terminals and can communicate with other processors using remote input output network protocol. The power dissipation of this device is 11.8 watts maximum and the thermal disspiation is 41.0 BTU/hr maximum. The physical dimensions of this device measure 176.5 mm x 68.8 mm x 98 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a 1791-8BC? We can help!
Request a QuoteKey Features:
- has voltage of 24v dc
- features dimensions of 6.95 x 2.7 x 3.85 in.
- has been discontinued/obsolete
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1791-8BC is an input/output block module that has 8 inputs and 8 outputs. It is a complete compact block which has all components inside, such as power supply, programmable controller, input and output connections and signal conditioning circuitry. It is suitable for an applications restricted by space limitations and applications that require input and output blocks to be close to sensors and actuators. Such distributed and compact I/O blocks can communicate with many types of process controllers. The input terminals of 1791-8BC acts as a sinking inputs and use nominal 24 volts DC. Therefore, the ON state voltage is 10 – 30 volts DC and ON state current is maximum 11 milliamperes. The OFF state voltage is maximum 5 volts DC. The 1791-8BC has remote I/O adapter and information from input can be transferred to remote processor or scanner. In same way, using RIO, the requested output voltages will appear at output terminals and drive the end user devices. The external power needed to power this device is a voltage of 19.2 to 30 volts DC and a current of 300 milliamperes. Outputs can support surge currents of maximum 3 amps for 50 milliseconds intervals, each repeatable every 2 seconds. Output current rating is 500 milliamperes at 140 degrees Fahrenheit and 1 amp at 86 degrees Fahrenheit. Maximum output signal delay from on to off state is 1.0 millisecond. The dimensions of this productmeasure out to 176.5 mm x 68.8 mm x 98 mm, or 6.95 inches x 2.7 inches x 3.85 inches.
FAQ
Question: Does Automation Stop offer repairs on the 1791-8BC?
Answer: Yes. We offer repairs for the 1791-8BC and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1791-8BC?
Answer: If you buy the 1791-8BC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1791-8BC online?
Answer: Yes. Automation Stop sells the 1791-8BC online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1791-8BC?
Answer: The 1791-8BC is made by Allen Bradley - PLC.
Question: What type of product is the 1791-8BC?
Answer: The 1791-8BC is part of the 1791 Block I/O series.
Question: What voltage is included with the 1791-8BC?
Answer: The 1791-8BC by Allen Bradley - PLC has a voltage of 24.
Series information for 1791-8BC
For additional information about 1791-8BC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1791-8BC.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 1791-8BC/A | 1791-8BC Ser A, Series A, Rev A | Request a Quote |
| 1791-8BC/B | 1791-8BC Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
- 1791-88C
- 1791-BBC
- 1791-B8C
- 179I-8BC
- 179I-88C
- 179I-BBC
- 179I-B8C
- I791-8BC
- I791-88C
- I791-BBC
- I791-B8C
- I79I-8BC
- I79I-88C
- I79I-BBC
- I79I-B8C
