GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1794-OE12 |
Series: | Flex I/O 1794 |
UPC: | 10612598320193 |
Description:
The 1794-OE12 is an analog output module. It is designed by Allen-Bradley. The module has a total of 12 ports on it. Through these ports, this analog module can deliver 0-20 milliamperes of current. It is powered via a 24-volt DC power supply. The 1794-OE12 module comes with a 4 key-switch position. The resolution on this Allen-Bradley module is 16-bit resolution. It can absorb 50G of non-operational shock and 30G of operational shock. The physical dimensions of this device measure 3.7 inches x 3.7 inches x 2.1 inches.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1794-OE12 is an analog output module. The module has twelve (12) output ports through which it delivers 0 to 20 milliamperes current. The module comes with a four (4) key-switch position with a 16-bit resolution. It has the dimension of 3.7 inches x 3.7 inches x 2.1 inches (H x W x D) and has a 24-volt direct current (DC) external power supply. It has one (1) indicator which shows the power status. This indicator can be either red or green depending on the situation. The module also includes a flex-bus to carry 80 milliamperes current and it also has an isolation voltage of 50 volts.
The 1794-OE12 dissipates the power of 4.3 watts at 24 volts direct current, 4.0 watts at 31.2 volts direct current, and 4.0 watts at 10.0 volts direct current. This device has a wire size of 0.34 to 2.5 mm². The thermal dissipation of the 1794-OE12 is 4.7 BTU/hr at 24 volts direct current. The module comes with an open-style enclosure and has two (2) signals and two (2) power ports. It has an operating temperature of -40 to 185 degrees Fahrenheit and a relative humidity rating of five percent to ninety-five percent. It is capable of withstanding a vibration up to 5G at 500 hertz (Hz). Additionally, this device can withstand an operating shock of 30G, as well as a non-operating shock of 50G. This product is reliable due to its ESD immunity, EFT/B immunity, surge transient Immunity, radiated RF immunity, and conducted RF immunity.
Question: Does Automation Stop offer repairs on the 1794-OE12?
Answer: Yes. We offer repairs for the 1794-OE12 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1794-OE12?
Answer: If you buy the 1794-OE12 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1794-OE12 online?
Answer: Yes. Automation Stop sells the 1794-OE12 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1794-OE12?
Answer: The 1794-OE12 is made by Allen Bradley - PLC.
Question: What type of product is the 1794-OE12?
Answer: The 1794-OE12 is part of the Flex I/O 1794 series.
For additional information about 1794-OE12 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1794-OE12.
Revision Part # | Also Known As | Availability |
---|---|---|
1794-OE12/A | 1794-OE12 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.