GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1794-OE4XT |
Series: | 1794 |
Description:
The 1794-OE4XT is a Flex I/O module that can be used with any Allen-Bradley programmable controller. The I/O module is provided with the bus interface and circuitry that is required to perform specific functions related to user-based applications. The voltage supply to the I/O module is twenty-four (24) volts direct current (DC). The I/O module has analog terminals and it has four (4) analog outputs that are single-ended and are non-isolated.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1794-OE4XT is a device that belongs to the FLEX I/O system. This system is an I/O system that is small and modular, and it is used for distributed applications that provide the functionality of all rack-based inputs and outputs. The FLEX I/O system is divided into 3 main components: the adapter, terminal base, and I/O module. The 1794-OE4XT is a unit that belongs to the I/O module. The adapter and power supply provide the logic that forms the basis of the system for a maximum of eight (8) I/O modules, the terminal base is made up of a terminal strip that terminates wiring for two- or three-wire devices. And lastly, the I/O module is made of bus interface and circuitry which is needed to perform application-related specific functions as per user requirements.
Part number 1794-OE4XT has a power supply voltage of 24 volts direct current (DC). The terminals have 4 analog outputs which are single-ended and are non-isolated. FLEX I/O modules consist of output, input, and combination modules which are block transfer modules that allow for the interfacing of analog signals to all kinds of Allen-Bradley programmable controllers that have block transfer capability. The Block transfer programming works by moving input fetched from the memory of the module to a designated area within the data table of the processor, and for the output data, it does the same in reverse i.e., it takes words from a designated area within the data table of the processor to the memory of the module. The programming also allows for the transfer of configuration words from the data table of the processor to the memory of the module.
Question: Does Automation Stop offer repairs on the 1794-OE4XT?
Answer: Yes. We offer repairs for the 1794-OE4XT and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1794-OE4XT?
Answer: If you buy the 1794-OE4XT through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1794-OE4XT online?
Answer: Yes. Automation Stop sells the 1794-OE4XT online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1794-OE4XT?
Answer: The 1794-OE4XT is made by Allen Bradley - PLC.
Question: What voltage is included with the 1794-OE4XT?
Answer: The 1794-OE4XT includes a voltage of 24.
For additional information about 1794-OE4XT check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1794-OE4XT.
Revision Part # | Also Known As | Availability |
---|---|---|
1794-OE4XT/A | 1794-OE4XT Ser A, Series A, Rev A | Request a Quote |
1794-OE4XT/B | 1794-OE4XT Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.