GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1794-OV16 |
Series: | Flex I/O 1794 |
UPC: | 10612598172792 |
Description:
Part number 1794-OV16 from Allen-Bradley is a digital output module from the Flex I/O 1794 line of products. It has sixteen sinking outputs of twenty-four (24) volts DC (direct current) power. The 1794-OV16 digital unit output is an open-type module that complies with the IP 20 standard for environmental protection. It is DIN rail mountable. The 1794-OV16 digital output module runs with an on-state output voltage of 10 to 31.2 volts DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1794-OV16 from Allen-Bradley is a FLEX digital DC output module. It is installed inside the terminal bus, bridging the gap between the external devices and the I/O bus. These modules may be added or withdrawn while the power is on, as the I/O module is not directly connected. This saves time and eliminates the inefficiencies associated with system restarts.
The 1794-OV16 module is equipped with sixteen current sinking outputs. It features a nominal On-State voltage output of 24 volts DC, a range of On-State output voltages of 10 to 31.2 volts DC (direct current), and a highest on-state output current of five hundred (500) milliamperes per channel and eight (8) amperes per module. It offers a maximum output delay of 0.5 milliseconds between off and on states and 1.0 milliseconds between on and off states. It dissipates a maximum of 4.2 watts at 31.2 volts DC. The 1794-TB3 and 1794-TB3S are compatible terminal base units. It is powered externally from a 10 to 31.2 volt DC source with a 5% AC ripple and a current range of 20 to 65 milliamperes. It is easily snapped onto the DIN rail. It communicates using a variety of protocols, including ControlNet, DeviceNet, Ethernet/IP, and Universal Remote I/O.
The 1794-OV16 module has sixteen yellow LED status indicators for every channel that identifies the input device and output signal associated with that channel. Additionally, it offers XT versions of conventional modules for use in harsh locations, lowering panel and maintenance requirements. It operates between 0 and 55 °C (32 and 131 °F) and has a non-condensing humidity level maximum of 95%.
Question: Does Automation Stop offer repairs on the 1794-OV16?
Answer: Yes. We offer repairs for the 1794-OV16 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1794-OV16?
Answer: If you buy the 1794-OV16 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1794-OV16 online?
Answer: Yes. Automation Stop sells the 1794-OV16 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1794-OV16?
Answer: The 1794-OV16 is made by Allen Bradley - PLC.
Question: What type of product is the 1794-OV16?
Answer: The 1794-OV16 is part of the Flex I/O 1794 series.
Question: What voltage does the 1794-OV16 have?
Answer: The 1794-OV16 includes a voltage of 24.
Question: What amperage is included with the Allen Bradley - PLC 1794-OV16?
Answer: The 1794-OV16 by Allen Bradley - PLC has a amperage of 8.
For additional information about 1794-OV16 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1794-OV16.
Revision Part # | Also Known As | Availability |
---|---|---|
1794-OV16/A | 1794-OV16 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.