GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1794-TBNF

✓ In Stock

1794-TBNF Image 1 thumbnail
1794-TBNF Image 2 thumbnail
1794-TBNF Image 3 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1794-TBNF
Series: Flex I/O 1794

Description:

The Allen-Bradley 1794-TBNF is an input/output terminal base unit. It includes a flex bus for the voltage supply of 5 volts direct current (DC) at 640 milliamperes and can provide up to 2 amperes current at the input/output terminal. This device has a terminal screw torque of 1.4 Nm. There are a total of 8 fuse circuits on this I/O unit. These fuse circuits are internally installed. Users can use a slow blow fuse with this terminal base.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$53.00

Available: 131

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$43.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1794-TBNF? We can help!

Request a Quote

Key Features:

  • utilizes 94x94x69 mm dimensions
  • provides a 24v dc/ac, 120v dc/ac, 230v dc/ac voltage rating

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1794-TBNF module comes with 16 different input/output connections. There are 2 common terminals on it. It has a 1.4 Nm terminal screw torque. The module comes with the Flex-bus feature. The Allen-Bradley 1794-TBNF must be provided with a voltage supply of 5 volts and a current of 640 milliamperes. Unlike other similar modules, this input/output terminal can handle up to 2 amperes current. It has a basic insulation type. The isolation voltage capability on this module is rated at up to 250 volts when operating continuously. This I/O module should be placed inside an open-type enclosure. The module comes with a wire size of 0.34 to 3.3 mm². This module can be plugged in with both stranded or solid copper-type wire. The dimension of this controller is 94 mm x 94 mm x 69 mm (height x width x depth).

The 1794-TBNF module has an operating temperature of -4 to 131 degrees Fahrenheit. This module should be stored at -40 to 185 degrees Fahrenheit. If kept at a higher or lower temperature than the recommended range, this module can get permanently damaged. This module should remain in an area where the relative humidity stays between 5% and 95% and is non-condensing. It can withstand an operating shock rated at 30G, as well as a non-operating shock rated at 50 G. It can withstand the vibration of 5 G at up to 500 hertz. The module has a fuse rating of 1.6 amperes at 250 volts alternating current (AC).  The 1794-TBNF also includes 5/20 millimeters fuse size. There are a total of eight (8) slow-blow fuses on this terminal. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1794-TBNF?

Answer: Yes. We offer repairs for the 1794-TBNF and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1794-TBNF?

Answer: If you buy the 1794-TBNF through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1794-TBNF online?

Answer: Yes. Automation Stop sells the 1794-TBNF online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1794-TBNF?

Answer: The 1794-TBNF is made by Allen Bradley - PLC.


Question: What type of product is the 1794-TBNF?

Answer: The 1794-TBNF is part of the Flex I/O 1794 series.


Series information for 1794-TBNF

For additional information about 1794-TBNF check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1794-TBNF.

Revision Part # Also Known As Availability
1794-TBNF/A 1794-TBNF Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1794-T8NF
  • I794-TBNF
  • I794-T8NF

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP