GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1797-RPFM

✓ In Stock

1797-RPFM Image 1 thumbnail
1797-RPFM Image 2 thumbnail
1797-RPFM Image 3 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1797-RPFM
Series: Flex I/O 1797
UPC: 10612598173751

Description:

The Allen-Bradley 1797-RPFM is a repeater module that creates repeater hubs. It can also prolong the length of DeviceNet segments. It takes 5.4 volts of input power for operating. It has 5 Mbits communication rate, 3 km media length, 1300 millimeter operating wavelength, and a13.3 dB optical power budget. In addition, it uses 62.5 to 125 millimeters fiber type, and it also features two indicator channels that display the status of the operation.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$1,209.00

Available: 2

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$806.00

Available: 4

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$645.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1797-RPFM? We can help!

Request a Quote

Key Features:

  • has input power of 5.4v

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1797-RPFM is a ControlNet Ex-Fiber repeater module. It can integrate with Allen-Bradley's 1797-RPA from the 1797 series to create a repeater hub. It can also extend the length of the ControlNet segments. This module can be applied to hazardous areas and can allow interoperability among ControlNet modules. Additionally, this repeater module is a medium-range outcome that comes with two link channels. Its communication rate is 5 megabits, and its fiber media length is 3 km. The compatible fiber type is 62.5-125 mm, and its termination type is ST plastic or ceramic. Moreover, its operating wavelength is 1300 mm, and its optical power budget is 13.3 dB. The module powers 5.4V, and its optical peak output power is less than one milliwatts. Besides that, it features two status channels with green color indicators. This module carries agency certificates. The corresponding specs about the module's IS media are available in user guides from the manufacturer. Since this repeater module allows DIN rail mounting type, it is mountable directly using a mounting kit. The 1794-NM1 kit is able to attach this repeater directly to the DIN rail using 18 screws. Each module takes two screws for this mounting. It complies with the UL, C-UL INMETRO, IECEx, FM, and CENELEC certifications, and standards. Users should maintain the appropriate temperature ratings for the storage and operation and the humidity conditions, especially the ratings instructed by the respective manufacturers. The 1797-RPFM should not come into contact with substances such as liquids and chemicals that may harm it.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1797-RPFM?

Answer: Yes. We offer repairs for the 1797-RPFM and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1797-RPFM?

Answer: If you buy the 1797-RPFM through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1797-RPFM online?

Answer: Yes. Automation Stop sells the 1797-RPFM online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1797-RPFM?

Answer: The 1797-RPFM is made by Allen Bradley - PLC.


Question: What type of product is the 1797-RPFM?

Answer: The 1797-RPFM is part of the Flex I/O 1797 series.


Series information for 1797-RPFM

For additional information about 1797-RPFM check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1797-RPFM.

Revision Part # Also Known As Availability
1797-RPFM/A 1797-RPFM Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • I797-RPFM

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP