GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 100S-C30EJ14BC |
Series: | 100S |
UPC: | 10662074993649 |
Description:
The 100S-C30EJ14BC is a safety contactor used in the feedback control systems. This contactor has a current rating of 30 amperes, and its coil is an electronic coil that operates on 24 volts DC. The contactor has three poles with one normally open auxiliary contact and four normally closed contacts. The module has bifurcated contacts. The contactor has dimensions of 45 x 105 x 136.5 mm, measured in height by width by depth.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 100S-C30EJ14BC is a safety contactor from the IEC 100S series of contactors from Allen-Bradley. This contactor can bear a load current of a maximum of 30 amperes. The contactor has a three phase power rating of 10 kilowatts at 230 volts AC, 15 kilowatts at 400/415 volts AC, 15 kilowatts at 500 Volts AC, and 15 kilowatts at 690 volts AC. At 115 volts AC (single phase) the horsepower rating of the contactor is 2 hp, while at 230 volts AC (single phase) it's 5 hp. The contactor is IP2X rated for its entire construction and comes tested for shock and vibration resistance. The 100S-C30EJ14BC contactor has a maximum storage temperature of 176 degrees Fahrenheit. All the safety contactors in the series have been marked red for easy identification. The terminals on this contactor are easy to access as they are front-mounted and can be tightened using a screwdriver. The rated Isolation voltage for the 100S-C30EJ14BC is 690 volts. The insulation class for the coil is Class F per IEC 60947-4-1. The coil has a rated frequency of 50/60 Hz. The maximum altitude for installation is 3000 meters. Mounting of a contactor in a panel box is always recommended to protect it against dust and moisture. The contactor must not be installed in a toxic or corrosive environment since it does not provide protection against such factors. The contactor measures 44.9 mm x 105 mm x 136.5 mm. The 100S-C30EJ14BC is a single-pack safety contactor with a line-side coil terminal.
MPN | 100S-C30EJ14BC |
Series | MCS-C Non-Reversing Safety Contactor |
Manufacturer | Allen Bradley |
Product Type | Compact Frame IEC Contactor |
Terminal Type | Standard |
Contactor Amperage | 30A |
Control Voltage | 24V DC |
Auxiliary Contacts | 1 N.O. 4 N.C. |
Main Poles | 3 |
Options | With gold-plated bifurcated auxiliary contacts |
Question: Does Automation Stop offer repairs on the 100S-C30EJ14BC?
Answer: Yes. We offer repairs for the 100S-C30EJ14BC and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 100S-C30EJ14BC?
Answer: If you buy the 100S-C30EJ14BC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 100S-C30EJ14BC online?
Answer: Yes. Automation Stop sells the 100S-C30EJ14BC online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 100S-C30EJ14BC?
Answer: The 100S-C30EJ14BC is made by Allen Bradley - Miscellaneous.
Question: What Auxiliary Contacts does the Rockwell-Automation 100S-C30EJ14BC have?
Answer: The 100S-C30EJ14BC has a Auxiliary Contacts of 1 N.O. 4 N.C..
Question: What contactor component Amperage does the 100S-C30EJ14BC have?
Answer: The contactor unit Amperage of the Allen-Bradley 100S-C30EJ14BC is 30A.
Question: What Control Voltage does the 100S-C30EJ14BC have?
Answer: The Allen-Bradley 100S-C30EJ14BC has a Control Voltage of 24 volts direct current.
Question: What is the Main Poles of the 100S-C30EJ14BC?
Answer: The Main Poles of the 100S-C30EJ14BC is 3.
Question: What kind of Options does the Allen Bradley-Rockwell Automation 100S-C30EJ14BC have?
Answer: The 100S-C30EJ14BC has Options With gold-plated bifurcated auxiliary contacts.
Question: What Product Type does the Allen-Bradley 100S-C30EJ14BC have?
Answer: The 100S-C30EJ14BC has a Compact Frame IEC contactor unit Product Type.
Question: What Terminal Type is included with the Allen Bradley Automation 100S-C30EJ14BC?
Answer: The 100S-C30EJ14BC has a Standard Terminal Type.
For additional information about 100S-C30EJ14BC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 100S-C30EJ14BC.
Revision Part # | Also Known As | Availability |
---|---|---|
100S-C30EJ14BC/A | 100S-C30EJ14BC Ser A, Series A, Rev A | Request a Quote |
100S-C30EJ14BC/B | 100S-C30EJ14BC Ser B, Series B, Rev B | Request a Quote |
100S-C30EJ14BC/C | 100S-C30EJ14BC Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.