GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 140-MN-1600 |
Series: | 140 |
UPC: | 10662468198629 |
Description:
Part number 140-MN-1600, which was designed and produced by Allen Bradley / Rockwell Automation, is a manual motor starter switch, also known as a manual motor controller. It belongs to the Bulletin 140 series of products and is part of the series C of circuit breakers. This device has an operating current rating of 25 amperes. This product is equipped with three (3) shafts, as well as three (3) poles. The current adjustment rating of this Allen Bradley product is 10 amperes to 16 amperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 140-MN-1600 is a manual motor starter switch, also known as a manual motor controller, that was designed and manufactured by Allen Bradley /Rockwell Automation. This device has an operating current rated at twenty-five (25) amperes. This device is equipped with three (3) shafts. Additionally, this device is equipped with three (3) poles. Its weight is approximately two (2) pounds. This device belongs to the Bulletin 140 series of products. It is IEC (International Electromechanical Commission) listed. This manual motor starter circuit breaker shows current adjustment range between ten (10) amperes to sixteen (16) amperes. It is a part of series C of circuit breakers. This manual motor controller has physical dimensions that measure two (2) inches x four (4) inches x five (5) inches (height x width x depth). The Allen Bradley 140-MN-1600 manual motor starter has a rated voltage of six hundred and ninety (690) volts alternating current (AC). This Allen Bradley product is certified by UL, UPC, CLU, CL. The United Nations Standard Products and Services Code (UNSPSC) code of this manual motor starter switch is 39121500. The devices that actively or quickly change to activate the motors and finish the electric motors are known as motor starters. They also safeguard the motor circuits from overloading. This electromechanical motor is an electrical appliance that starts motors and includes functions like motor separation, overcurrent protection, short-circuit safety, and automation all in one unit. In the year 2014, this device was discontinued by Allen Bradley / Rockwell Automation.
Question: Does Automation Stop offer repairs on the 140-MN-1600?
Answer: Yes. We offer repairs for the 140-MN-1600 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 140-MN-1600?
Answer: If you buy the 140-MN-1600 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 140-MN-1600 online?
Answer: Yes. Automation Stop sells the 140-MN-1600 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 140-MN-1600?
Answer: The 140-MN-1600 is made by Allen Bradley - Miscellaneous.
Question: What amperage is included with the 140-MN-1600?
Answer: The 140-MN-1600 has a amperage of 10-16.
For additional information about 140-MN-1600 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 140-MN-1600.
Revision Part # | Also Known As | Availability |
---|---|---|
140-MN-1600/A | 140-MN-1600 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.