GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 140U-J6S3-D25 |
Series: | 140U |
Description:
The 140U-J6S3-D25 is an isolator comprises a molded case switch from the Bulletin 140U series of Allen-Bradley products. It has current ratings ranging from 15 amperes to 1200 amperes. It has a J frame molded case. This device has a total of three (3) poles. It dissipates a total of 20 watts of power as heat during the operation. It works up to 250 amperes, and is used to assemble the other frames, including H, K, and J frames.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 140U-J6S3-D25 is an isolator circuit breaker manufactured by Rockwell Automation, a product of Allen-Bradley. This isolator circuit breaker is part of Allen-Bradley's Bulletin 140U product line, which is comprised of molded case switches that have current ratings ranging from 15 to 1200 amperes. During operation, the 140U-J6S3-D25 circuit breaker dissipates a total of twenty (20) watts of power as heat during the operation. This product operates in three (3) phases. It has very high current interrupting capacity. It is a bolt on molded isolator circuit breaker with a non-automatic switch. It has no over current protection. This product is factory assembled. Select internal control modules are used in the assembling of all frames. This protection circuit breaker has magnetic tripping power at 2500 amperes. It has a J frame structure. This molded case circuit breaker works up to two hundred and fifty (250) amperes. The total number of poles for this device is three (3). It is right side mounted device. It has auxiliaries AX which are combined with AL alarm. This isolating molded high-capacity breaker also lacks alarms in it. It has zero (0) kiloamperes (kA) of maximum available overload current at the switch in the circuit. This device is equipped with a busbar mounting mechanism. This device does not have any shunt trip (SNT) or undervoltage release (UVT). The busbar mounting module is used to assemble the other frames including H, K, and J frames. This Allen-Bradley circuit breaker was discontinued by its manufacturer in 2014.
Question: Does Automation Stop offer repairs on the 140U-J6S3-D25?
Answer: Yes. We offer repairs for the 140U-J6S3-D25 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 140U-J6S3-D25?
Answer: If you buy the 140U-J6S3-D25 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 140U-J6S3-D25 online?
Answer: Yes. Automation Stop sells the 140U-J6S3-D25 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 140U-J6S3-D25?
Answer: The 140U-J6S3-D25 is made by Allen Bradley - Miscellaneous.
Question: What amperage does the Allen Bradley - Miscellaneous 140U-J6S3-D25 have?
Answer: The Allen Bradley - Miscellaneous 140U-J6S3-D25 includes a amperage of 250.
For additional information about 140U-J6S3-D25 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 140U-J6S3-D25.
Revision Part # | Also Known As | Availability |
---|---|---|
140U-J6S3-D25/A | 140U-J6S3-D25 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.