GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1489-A1C200 |
Series: | 1489 |
Description:
The Allen-Bradley 1489-A1C200 is a robust circuit breaker that can be used to effectively protect the electrical wiring in a control system. This device functions on alternating current and can withstand vibrations ranging from 10 Hertz to 200 Hertz.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1489-A1C200 is a highly effective circuit breaker that can be used to protect industrial automation systems from sudden spikes in voltage and current. The device functions on alternating current and primarily prevents the wires in the electrical circuits from overheating. The circuit breaker also protects components of the control system from surges in power and creates a reliable safety net for the user within the automation system. This ensures that the components of the system can operate at optimum efficiency levels without result in a compromise in the safety of the industrial working environment. The circuit breaker can be used in conjunction with internal fuses in the components of the automation system to create a robust control system that displays excellent safety characteristics and can be used in a wide variety of environments.
The Allen-Bradley 1489-A1C200 can be used to create a mathematical threshold that prevents specific parameters from overreaching the boundaries of the control system. These parameters can include operational voltage, current, and heating rates of the components of the control system. The circuit breaker has a dielectric strength of 1960 volts of alternating current and is fairly immune to shocks and vibrations that are produced by the control system. The device can withstand vibrations within a range of 10 Hertz and 200 Hertz and is certified to be used in industrial environments. The circuit breaker has a recommended wire length of 0.5 inches. The circuit breaker can have either one or two wires and both systems are compatible with a #18 AWG wire size.
Brand: | Allen-Bradley / Rockwell Automation |
Series: | Bulletin 1489 Circuit Breakers |
Part Number: | 1489-A1C200 |
Type: | AC Circuit Breaker |
HACR Rating: | Yes |
SWD Rating: | Yes |
Dielectric strength: | 1960V AC |
Shock: | 25g half sine wave for 11ms |
Vibration: | 10-200 Hz |
Maximum amplitude: | 0.03 inches |
Wire Size (1 wire): | #18-6 AWG |
Wire Size (2 wire): | #18-10 AWG |
Recommended Wire Length: | 0.5 inches |
Degree of Protection (front): | IP20 |
Degree of Protection (terminals): | IP00 |
Question: Does Automation Stop offer repairs on the 1489-A1C200?
Answer: Yes. We offer repairs for the 1489-A1C200 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1489-A1C200?
Answer: If you buy the 1489-A1C200 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1489-A1C200 online?
Answer: Yes. Automation Stop sells the 1489-A1C200 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1489-A1C200?
Answer: The 1489-A1C200 is made by Allen Bradley - Miscellaneous.
Question: What Brand: is included with the Allen-Bradley 1489-A1C200?
Answer: The 1489-A1C200 has a Allen Bradley (AB) / Rockwell Automation Brand:.
Question: What is the Degree of Protection (front): of the 1489-A1C200?
Answer: The Degree of Protection (front): of the 1489-A1C200 is IP20.
Question: What is the Degree of Protection (terminals): of the 1489-A1C200?
Answer: The Degree of Protection (terminals): of the Allen Bradley/Rockwell Automation 1489-A1C200 is IP00.
Question: What Dielectric strength: does the Allen Bradley-Rockwell Automation 1489-A1C200 have?
Answer: The Allen Bradley-Rockwell Automation 1489-A1C200 has a Dielectric strength: of 1960 volts alternating current (AC).
Question: Does the Allen Bradley 1489-A1C200 have a HACR Rating:?
Answer: Yes.
Question: What Maximum amplitude: does the 1489-A1C200 have?
Answer: The 1489-A1C200 has a Maximum amplitude: of 0.03 (in).
Question: What is the part Number: of the 1489-A1C200?
Answer: The component Number: of the 1489-A1C200 is 1489-A1C200.
Question: What is the Recommended Wire Length: of the 1489-A1C200?
Answer: The Allen Bradley-Rockwell Automation 1489-A1C200 has a Recommended Wire Length: of 0.5 (in).
Question: What is the Series: of the Allen Bradley/Rockwell Automation 1489-A1C200?
Answer: The Series: of the Allen Bradley/Rockwell Automation 1489-A1C200 is Bulletin 1489 Circuit Breakers.
Question: What Shock: does the Rockwell Automation 1489-A1C200 have?
Answer: The Shock: of the 1489-A1C200 is 25g half sine wave for 11ms.
Question: Does the Allen Bradley-Rockwell Automation 1489-A1C200 have a SWD Rating:?
Answer: Yes.
Question: What Type: does the 1489-A1C200 have?
Answer: The 1489-A1C200 has a alternating current (AC) Circuit Breaker Type:.
Question: What is the Vibration: of the Rockwell-Automation 1489-A1C200?
Answer: The 1489-A1C200 has a Vibration: of 10-200 Hz.
Question: What Wire Size (1 wire): does the 1489-A1C200 have?
Answer: The Wire Size (1 wire): of the 1489-A1C200 is #18-6 AWG.
Question: What Wire Size (2 wire): does the 1489-A1C200 have?
Answer: The 1489-A1C200 has a Wire Size (2 wire): of #18-10 AWG.
For additional information about 1489-A1C200 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1489-A1C200.
Revision Part # | Also Known As | Availability |
---|---|---|
1489-A1C200/A | 1489-A1C200 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.