GE / IP FANUC Series 90/30 In Stock
150-A16NB
✓ In Stock
| Manufacturer: | Allen Bradley - Miscellaneous |
| Product Type: | Automation Product |
| Part Number: | 150-A16NB |
| Series: | SMC-2 |
Description:
The Allen-Bradley 150-A16NB SMC-2 smart motor controller is a solid-state soft starter with an input line voltage of 380 to 480 volts AC. It has current and power ratings of 16 amperes and 10 Hp (7.5 kW), respectively. The 3-phase programmable controller is designed to operate at 50/60 Hz and comes in an open enclosure. It measures 7.874 x 7.874 x 6.096 mm while weighing 5 lb and is not equipped with protective or interface modules.
Key Features:
- comes with 380-480 vac of input power
- ships with a open enclosure
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 150-A16NB SMC-2 smart motor controller is a soft starter that can be used to start standard single and 3-phase squirrel cage induction motors. The solid-state controller has an input line voltage of 380 to 480 volts AC (+10%, -15%) at 50/60 Hz (hertz), with output current and power ratings of 16 amperes and 4 to 7.5k W (3 to10 Hp), respectively. The controller is designed with IEC and NEMA/MG1 rated thermal capacity with maximum heat dissipation of 70 watts. Its RC networks provide a high DV/DT protection with a peak inverse voltage (PIV) of 1400 volts. The controller has a compact design with built-in protective and energy saving features, the latter being useful when the motor remains lightly loaded or unloaded for longer periods of time.
The controller has three (3) standard modes of operation (soft start, current limit start, and full voltage start) and can be used in two configurations: in series with an electromechanical motor starter and as a controller with an interface option so that it can be operated externally. Additionally, the controller can operate within a temperature range of +32 to 122 degrees Fahrenheit and can be stored at –40 to 185 degrees Fahrenheit at a non-condensing relative humidity range of 5 to 95%. It is designed to withstand an operating shock of 30G for 11 milliseconds and maximum vibrations of 2.5G for 60 minutes. This device can be operated at an altitude reaching up to 2000 meters. The controller is packaged in a NEMA open type rated enclosure measuring 154 x 180 x 160 mm and weighs 7 lb (3.15 kg).
FAQ
Question: Does Automation Stop offer repairs on the 150-A16NB?
Answer: Yes. We offer repairs for the 150-A16NB and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-A16NB?
Answer: If you buy the 150-A16NB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 150-A16NB online?
Answer: Yes. Automation Stop sells the 150-A16NB online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 150-A16NB?
Answer: The 150-A16NB is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 150-A16NB?
Answer: The 150-A16NB is part of the SMC-2 series.
Question: What voltage does the 150-A16NB have?
Answer: The 150-A16NB by Allen Bradley - Miscellaneous has a voltage of 600.
Series information for 150-A16NB
For additional information about 150-A16NB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-A16NB.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 150-A16NB/A | 150-A16NB Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
- 150-A16N8
- 150-A1GNB
- 150-A1GN8
- 150-AI6NB
- 150-AI6N8
- 150-AIGNB
- 150-AIGN8
- 15O-A16NB
- 15O-A16N8
- 15O-A1GNB
- 15O-A1GN8
- 15O-AI6NB
- 15O-AI6N8
- 15O-AIGNB
- 15O-AIGN8
- 1S0-A16NB
- 1S0-A16N8
- 1S0-A1GNB
- 1S0-A1GN8
- 1S0-AI6NB
- 1S0-AI6N8
- 1S0-AIGNB
- 1S0-AIGN8
- 1SO-A16NB
- 1SO-A16N8
- 1SO-A1GNB
- 1SO-A1GN8
- 1SO-AI6NB
- 1SO-AI6N8
- 1SO-AIGNB
- 1SO-AIGN8
- I50-A16NB
- I50-A16N8
- I50-A1GNB
- I50-A1GN8
- I50-AI6NB
- I50-AI6N8
- I50-AIGNB
- I50-AIGN8
- I5O-A16NB
- I5O-A16N8
- I5O-A1GNB
- I5O-A1GN8
- I5O-AI6NB
- I5O-AI6N8
- I5O-AIGNB
- I5O-AIGN8
- IS0-A16NB
- IS0-A16N8
- IS0-A1GNB
- IS0-A1GN8
- IS0-AI6NB
- IS0-AI6N8
- IS0-AIGNB
- IS0-AIGN8
- ISO-A16NB
- ISO-A16N8
- ISO-A1GNB
- ISO-A1GN8
- ISO-AI6NB
- ISO-AI6N8
- ISO-AIGNB
- ISO-AIGN8
