GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 150-F108NCD |
Series: | SMC-Flex |
Description:
This device, with the product number 150-F108NCD, is a smart motor controller that was manufactured by Allen Bradley. This device belongs to the Bulletin 150 series of products. This is considered to be a solid-state controller with an open-type enclosure. This controller has a control power rating of 100 to 240 volts AC at a frequency range of 50 to 60 hertz. It has a rated voltage of 500/575 volts AC, as well as a motor current rated at 27 to 108 amperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Designed and manufactured by the company known as Allen Bradley / Rockwell Automation, product number 150-F108NCD is an SMC Flex smart motor controller. This controller belongs to the Bulletin 150 series of products. This device is also considered to be a solid-state controller. It is equipped with an open-type enclosure. This controller has controller ratings, which include a current rating of 108 amperes, as well as a power rating of 75 horsepower (Hp) at 460 volts alternating current (AC). This smart motor controller has an input line voltage rated at 200 to 575 volts alternating current (AC), three phase at a frequency rating of 50 hertz and 60 hertz. The control voltage of this Allen Bradley product is 100 to 240 volts alternating current (AC). This device has a rated voltage of 500/575 volts alternating current (AC). The motor current of this unit is27 to 108 amperes. This smart motor controller has a maximum power of 75 kilowatts at 50 hertz, as well as 100 horsepower at 60 hertz.
The Allen Bradley 150-F108NCD smart motor controller should be operated within an area where the temperature ranges from -5 to 50 degrees Celsius, or the equivalent temperature range of 23 to 122 degrees Fahrenheit. However, when this controller is being stored, the temperature of the surrounding area should range from -20 to 75 degrees Celsius, or -4 to 167 degrees Fahrenheit. The humidity levels that are suitable for this smart motor controller range from 5% to 95% (non-condensing). It was designed to be used at altitudes of up to 2000 meters, or 6560 feet.
MPN | 150-F108NCD |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | SMC - Flex Controller |
Dimension - Width | 196.4 (7.74) |
Dimension - Height | 443.7 (17.47) |
Dimension - Depth | 212.2 (8.35) |
Dimension - Approx Ship. Wt. | 15 (33) |
Amps | 108 |
HP | 75 HP @ 460V AC |
Enclosure Type | Open |
Input Line Voltage | 200...575V AC, 3-Phase, 50 and 60 Hz |
Voltage | 100...240V AC (5...480 A units) |
Question: Does Automation Stop offer repairs on the 150-F108NCD?
Answer: Yes. We offer repairs for the 150-F108NCD and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-F108NCD?
Answer: If you buy the 150-F108NCD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 150-F108NCD online?
Answer: Yes. Automation Stop sells the 150-F108NCD online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 150-F108NCD?
Answer: The 150-F108NCD is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 150-F108NCD?
Answer: The 150-F108NCD is part of the SMC-Flex series.
Question: What amperes does the 150-F108NCD have?
Answer: The Rockwell Automation 150-F108NCD has a amperes of 108.
Question: What is the Dimension - Approx Ship. Wt. of the 150-F108NCD?
Answer: The Allen-Bradley 150-F108NCD has a Dimension - Approx Ship. Wt. of 15 (33).
Question: What Dimension - Depth does the Allen Bradley-Rockwell Automation 150-F108NCD have?
Answer: The Allen Bradley-Rockwell Automation 150-F108NCD has a Dimension - Depth of 212.2 (8.35).
Question: What is the Dimension - Height of the 150-F108NCD?
Answer: The Allen Bradley 150-F108NCD has a Dimension - Height of 443.7 (17.47).
Question: What Dimension - Width does the 150-F108NCD have?
Answer: The 150-F108NCD has a Dimension - Width of 196.4 (7.74).
Question: What Enclosure Type does the Rockwell Automation 150-F108NCD have?
Answer: The 150-F108NCD has a Open Enclosure Type.
Question: What is the HP of the Allen-Bradley 150-F108NCD?
Answer: The 150-F108NCD has a HP of 75 HP @ 460 volts alternating current (AC).
Question: What is the Input Line Voltage of the 150-F108NCD?
Answer: The Allen Bradley-Rockwell Automation 150-F108NCD has a Input Line Voltage of 200...575 volts alternating current (AC), 3-Phase, 50 and 60 Hz.
Question: What Voltage does the 150-F108NCD have?
Answer: The Voltage of the 150-F108NCD is 100...240 volts alternating current (AC) (5...480 A units).
For additional information about 150-F108NCD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-F108NCD.
Revision Part # | Also Known As | Availability |
---|---|---|
150-F108NCD/A | 150-F108NCD Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.