GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 150-F251NCR |
Series: | SMC-Flex |
Description:
This Allen Bradley (AB) SMC-Flex is a controller, mtr 480 volts max.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
MPN | 150-F251NCR |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | SMC - Flex Controller |
Dimension - Width | 225 ( 8.858) |
Dimension - Height | 560 (22.047) |
Dimension - Depth | 253.8 (9.992) |
Dimension - Approx Ship. Wt. | 30.4 (67) |
Amps | 251 |
HP | 200 HP @ 460V AC |
Enclosure Type | Open |
Input Line Voltage | 200...575V AC, 3-Phase, 50 and 60 Hz |
Voltage | 24V AC/DC (5...480 A units) |
Question: Does Automation Stop offer repairs on the 150-F251NCR?
Answer: Yes. We offer repairs for the 150-F251NCR and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-F251NCR?
Answer: If you buy the 150-F251NCR through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 150-F251NCR online?
Answer: Yes. Automation Stop sells the 150-F251NCR online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 150-F251NCR?
Answer: The 150-F251NCR is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 150-F251NCR?
Answer: The 150-F251NCR is part of the SMC-Flex series.
Question: What amperes does the Allen-Bradley 150-F251NCR have?
Answer: The amperes of the Allen-Bradley 150-F251NCR is 251.
Question: What Dimension - Approx Ship. Wt. does the 150-F251NCR have?
Answer: The Dimension - Approx Ship. Wt. of the 150-F251NCR is 30.4 (67).
Question: What Dimension - Depth does the 150-F251NCR have?
Answer: The 150-F251NCR has a Dimension - Depth of 253.8 (9.992).
Question: What is the Dimension - Height of the 150-F251NCR?
Answer: The Dimension - Height of the Rockwell Automation 150-F251NCR is 560 (22.047).
Question: What Dimension - Width does the 150-F251NCR have?
Answer: The 150-F251NCR has a Dimension - Width of 225 ( 8.858).
Question: What Enclosure Type is included with the Allen Bradley Automation 150-F251NCR?
Answer: The 150-F251NCR has a Open Enclosure Type.
Question: What HP does the Rockwell Automation 150-F251NCR have?
Answer: The Rockwell Automation 150-F251NCR has a HP of 200 HP @ 460 volts AC (alternating current).
Question: What is the Input Line Voltage of the 150-F251NCR?
Answer: The Input Line Voltage of the Rockwell-Automation 150-F251NCR is 200...575 volts alternating current (AC), 3-Phase, 50 and 60 Hz.
Question: What Voltage does the Allen-Bradley 150-F251NCR have?
Answer: The Allen-Bradley 150-F251NCR has a Voltage of 24 volts alternating current (AC)/direct current (DC) (5...480 A units).
For additional information about 150-F251NCR check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-F251NCR.
Revision Part # | Also Known As | Availability |
---|---|---|
150-F251NCR/A | 150-F251NCR Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.