GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

150-F85NBR

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 150-F85NBR
Series: SMC-Flex

Description:

Part number 150-F85NBR is a smart motor controller. Manufactured by Allen-Bradley, this device belongs within the SMC Flex line of products. This particular device has an open enclosure. It has a controller rating of 85 amperes and 60 horsepower, or Hp, at 460 volt alternating current (AC). The Allen-Bradley 150-F85NBR has a line voltage of 200 to 480 volts AC. The control voltage of this product is 24 volts AC/DC. This product has three (3) phase control. Additionally, the input line of this Flex smart Motor Controller is 50 to 60 hertz.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part Number 150-F85NBR is an SMC Flex Smart Motor Controller. This device was manufactured by Allen-Bradley. This device is used to start and stop connected motors via a line connection. These motors include the Wye-Delta 6-lead motors, as well as standard 3-phase squirrel cage induction motors. The Allen-Bradley 150-F85NBR operates in various ways, as well as modes. These modes include soft start and stop, current limit start, slow speed mode, full voltage and dual ramp start, and selectable kick-start. This particular SMC Flex Smart Motor Controller is a three-phase, non-combination controller. The input line voltage of this device ranges from 200 to 460V AC at a frequency of 50 and 60 hertz. The power rating of this device is 85 amperes and 60 horsepower at 460 volts AC. Additionally, the control voltage of the Allen-Bradley 150-F85NBR is 24 volts AC/DC. 

The Allen-Bradley 150-F85NBR has an open enclosure. The internal temperature of the enclosure must remain within a specific temperature range. This temperature range is 0 to 50 °C (32 to 122 °F). Additionally, the device must be stored within a certain ambient temperature range. The ambient temperature range must be maintained between -20 and +75 °C (-4 to +167 °F). This device must be stored in an area that is clean and dry. When installing this SMC Flex Smart Motor Controller, there should be a minimum fifteen (15) centimeter (cm), or 6 inches, or clearance, both above and below of the device. The physical dimensions of the controller are 610 x 406 x 254 mm., or 24 x 16 x 10 inches.

 

Technical Specifications

MPN 150-F85NBR
Manufacturer Allen Bradley / Rockwell Automation
Series SMC - Flex Controller
Dimension - Width 150.1 (5.91)
Dimension - Height 307 (12.09)
Dimension - Depth 203.1 (8.00)
Dimension - Approx Ship. Wt. 5.7 (12.6)
Amps 85
HP 60 HP @ 460V AC
Enclosure Type Open
Input Line Voltage 200...460V AC, 3-Phase, 50 and 60 Hz
Voltage 24V AC/DC (5...480 A units)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 150-F85NBR?

Answer: Yes. We offer repairs for the 150-F85NBR and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-F85NBR?

Answer: If you buy the 150-F85NBR through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 150-F85NBR online?

Answer: Yes. Automation Stop sells the 150-F85NBR online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 150-F85NBR?

Answer: The 150-F85NBR is made by Allen Bradley - Miscellaneous.


Question: What type of product is the 150-F85NBR?

Answer: The 150-F85NBR is part of the SMC-Flex series.


Question: What is the amperes of the 150-F85NBR?

Answer: The amperes of the 150-F85NBR is 85.


Question: What is the Dimension - Approx Ship. Wt. of the 150-F85NBR?

Answer: The Dimension - Approx Ship. Wt. of the 150-F85NBR is 5.7 (12.6).


Question: What Dimension - Depth does the Allen Bradley/Rockwell Automation 150-F85NBR have?

Answer: The Allen Bradley/Rockwell Automation 150-F85NBR has a Dimension - Depth of 203.1 (8.00).


Question: What Dimension - Height does the 150-F85NBR have?

Answer: The Dimension - Height of the 150-F85NBR is 307 (12.09).


Question: What is the Dimension - Width of the 150-F85NBR?

Answer: The Dimension - Width of the Rockwell-Automation 150-F85NBR is 150.1 (5.91).


Question: What Enclosure Type is included with the 150-F85NBR?

Answer: The Allen Bradley 150-F85NBR has a Open Enclosure Type.


Question: What HP does the Allen-Bradley 150-F85NBR have?

Answer: The HP of the 150-F85NBR is 60 HP @ 460 volts AC (alternating current).


Question: What is the Input Line Voltage of the 150-F85NBR?

Answer: The Input Line Voltage of the 150-F85NBR is 200...460 volts AC (alternating current), 3-Phase, 50 and 60 Hz.


Question: What Voltage does the Allen Bradley 150-F85NBR have?

Answer: The Allen Bradley 150-F85NBR has a Voltage of 24 volts AC (alternating current)/DC (5...480 A units).


Series information for 150-F85NBR

For additional information about 150-F85NBR check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-F85NBR.

Revision Part # Also Known As Availability
150-F85NBR/A 150-F85NBR Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 150-F85N8R
  • 150-F8SNBR
  • 150-F8SN8R
  • 150-FB5NBR
  • 150-FB5N8R
  • 150-FBSNBR
  • 150-FBSN8R
  • 15O-F85NBR
  • 15O-F85N8R
  • 15O-F8SNBR
  • 15O-F8SN8R
  • 15O-FB5NBR
  • 15O-FB5N8R
  • 15O-FBSNBR
  • 15O-FBSN8R
  • 1S0-F85NBR
  • 1S0-F85N8R
  • 1S0-F8SNBR
  • 1S0-F8SN8R
  • 1S0-FB5NBR
  • 1S0-FB5N8R
  • 1S0-FBSNBR
  • 1S0-FBSN8R
  • 1SO-F85NBR
  • 1SO-F85N8R
  • 1SO-F8SNBR
  • 1SO-F8SN8R
  • 1SO-FB5NBR
  • 1SO-FB5N8R
  • 1SO-FBSNBR
  • 1SO-FBSN8R
  • I50-F85NBR
  • I50-F85N8R
  • I50-F8SNBR
  • I50-F8SN8R
  • I50-FB5NBR
  • I50-FB5N8R
  • I50-FBSNBR
  • I50-FBSN8R
  • I5O-F85NBR
  • I5O-F85N8R
  • I5O-F8SNBR
  • I5O-F8SN8R
  • I5O-FB5NBR
  • I5O-FB5N8R
  • I5O-FBSNBR
  • I5O-FBSN8R
  • IS0-F85NBR
  • IS0-F85N8R
  • IS0-F8SNBR
  • IS0-F8SN8R
  • IS0-FB5NBR
  • IS0-FB5N8R
  • IS0-FBSNBR
  • IS0-FBSN8R
  • ISO-F85NBR
  • ISO-F85N8R
  • ISO-F8SNBR
  • ISO-F8SN8R
  • ISO-FB5NBR
  • ISO-FB5N8R
  • ISO-FBSNBR
  • ISO-FBSN8R

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP