GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

190-P250

✓ In Stock

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 190-P250
Series: 190

Description:

The 190-P250 is a Magnetic Trip Unit by Allen-Bradley and Rockwell Automation. It is mainly used to protect motor components against damage that could occur as a result of short circuits.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 190-P250 is a Magnetic Trip Unit that is manufactured and branded by Allen-Bradley and Rockwell Automation. The 190-P250 Magnetic Trip Unit consists of modular starter systems that are a family of modular components that are assembled into motor starters. The purpose of these is to protect motor components against any damage that could occur as a result of short circuits. When ordering the module, the order should include the catalog number of the manual interrupter, the catalog number of the contactor, the catalog number of the trip unit, and the catalog number of the required accessories. This 190-P250 Magnetic Trip Unit is approved by the CE, CSA, and UL standards, and they are certified by the IEC 94702, CSA C22.2, and the UL508 standards. It has a rated voltage of 110 Volts AC at 50 Hertz. The weight of the 190-A40D Magnetic Trip Unit module is 0.85 kilograms.

The pickup operating range is 85% to 110% of the nameplate voltage for this 190-P250 unit. The dropout operating range is 60% to 40% of the nameplate voltage. The operating tripping time is between 9 and 30 milliseconds for the closing delay and between 4 and 12 milliseconds for the opening delay. The making capacity is 400 Amperes and the breaking capacity is 400 Amperes. The recommended operating temperature range is between -25 to 60 degrees Celsius (-13 to 140 degrees Fahrenheit) when it is used in an open configuration. When the 190-P250 is in an enclosed configuration, the operating temperature range is between -25 and 40 degrees Celsius (-13 to 104 degrees Fahrenheit).

Technical Specifications

Brand Allen-Bradley/Rockwell Automation
Part Number/Catalog No. 190-P250
Coil Voltage 575 Volts AC
Power Rating 25 Horsepower
Product Type Magnetic Trip Unit
Storage Temperature -40 to 85° Celsius
Operating Temperature 0 to 60° Celsius
Connection type Standard
Rated Frequency 50-60 Hertz
Weight 300 grams
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 190-P250?

Answer: Yes. We offer repairs for the 190-P250 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 190-P250?

Answer: If you buy the 190-P250 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 190-P250 online?

Answer: Yes. Automation Stop sells the 190-P250 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 190-P250?

Answer: The 190-P250 is made by Allen Bradley - Miscellaneous.


Question: What Brand is included with the 190-P250?

Answer: The 190-P250 has a Allen Bradley/Rockwell Automation Brand.


Question: What is the Coil Voltage of the 190-P250?

Answer: The Rockwell-Automation 190-P250 has a Coil Voltage of 575 Volts alternating current (AC).


Question: What Connection type is included with the 190-P250?

Answer: The 190-P250 has a Standard Connection type.


Question: What is the Operating Temperature of the 190-P250?

Answer: The Allen Bradley Automation 190-P250 has a Operating Temperature of 0 to 60° Celsius.


Question: What is the unit Number/Catalog No. of the 190-P250?

Answer: The part Number/Catalog No. of the Allen Bradley 190-P250 is 190-P250.


Question: What Power Rating does the 190-P250 have?

Answer: The 190-P250 has a Power Rating of 25 Horsepower.


Question: What Product Type is included with the 190-P250?

Answer: The 190-P250 has a Magnetic Trip Unit Product Type.


Question: What is the Rated Frequency of the 190-P250?

Answer: The 190-P250 has a Rated Frequency of 50-60 Hertz.


Question: What Storage Temperature does the 190-P250 have?

Answer: The Storage Temperature of the Allen Bradley/Rockwell Automation 190-P250 is -40 to 85° Celsius.


Question: What Weight does the Allen-Bradley 190-P250 have?

Answer: The 190-P250 has a Weight of 300 grams.


Series information for 190-P250

For additional information about 190-P250 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 190-P250.

Revision Part # Also Known As Availability
190-P250/A 190-P250 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 190-P25O
  • 190-P2S0
  • 190-P2SO
  • 19O-P250
  • 19O-P25O
  • 19O-P2S0
  • 19O-P2SO
  • I90-P250
  • I90-P25O
  • I90-P2S0
  • I90-P2SO
  • I9O-P250
  • I9O-P25O
  • I9O-P2S0
  • I9O-P2SO

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP