GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 193-EA1CB |
Series: | 193 |
Description:
Product number 193-EA1CB is a solid-state overload relay. This device was designed and manufactured by Allen Bradley. This device belongs to the Bulletin 193 series of products. This overload relay has an adjustment range of 3.2:1. This product has 1 normally open (NO) and 1 normally closed (NC) isolated auxiliary contacts. The energy consumption of this device is specified as 150 milliwatts. This overload relay is self-powered and has phase loss protection.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Designed and manufactured by the company known as Allen Bradley / Rockwell Automation, product number 193-EA1CB is a solid-state overload relay. This overload relay belongs to the Bulletin 193 series of products manufactured by Allen Bradley. This product is self-powered and is equipped with phase loss protection. This solid-state overload relay has a wide adjustment range of 3.2:1. The contact configuration of this device consists of one (1) normally open (NO) and one (1) normally closed (NC) isolated auxiliary contacts. Additionally, this solid-state overload relay belongs to Trip Class 10. The Allen Bradley 193-EA1CB solid-state overload relay has an energy consumption specified as 150 milliwatts (mW).
The Allen Bradley 193-EA1CB has a rated insulation voltage of 690 volts. It also has a rated impulse strength of 6 kilovolts. The operating voltage of this solid-state overload relay is 690 volts. The weight of this Allen Bradley product is approximately 0.14 kilograms, or the equivalent of 0.31 pounds. The temperature rating that is suitable for this overload relay ranges from -20 degrees Celsius to +60 degrees Celsius, or the equivalent temperature range of -4 degrees Fahrenheit to 122 degrees Fahrenheit. The corrosion resistance of this product requires a relative humidity rating of 95 percent non-condensing with a temperature range of 30 degrees Celsius to 60 degrees Celsius. This solid-state overload relay can withstand a shock rated up to 30 G. This product is CE, UL, CSA, and PTB approved. Additionally, it meets the standards of IEC 947, EN 60 947, and DIN VDE 0660.
Question: Does Automation Stop offer repairs on the 193-EA1CB?
Answer: Yes. We offer repairs for the 193-EA1CB and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 193-EA1CB?
Answer: If you buy the 193-EA1CB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 193-EA1CB online?
Answer: Yes. Automation Stop sells the 193-EA1CB online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 193-EA1CB?
Answer: The 193-EA1CB is made by Allen Bradley - Miscellaneous.
Question: What amperage is included with the 193-EA1CB?
Answer: The 193-EA1CB has a amperage of 0.32-1.0.
For additional information about 193-EA1CB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 193-EA1CB.
Revision Part # | Also Known As | Availability |
---|---|---|
193-EA1CB/A | 193-EA1CB Ser A, Series A, Rev A | Request a Quote |
193-EA1CB/B | 193-EA1CB Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.