GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 193-EC5ZZ |
Series: | 193 |
Description:
Allen-Bradley?s 193-EC5ZZ is a microprocessor-based electronic overload relay within the E3 Plus relay family designed to offer enhanced current-based motor protection as well as voltage protection to devices. This device operates at a rated current range of 0.4 to 5000 amperes and a NEMA and IEC operating nominal voltage of 600 volts and 690/1000 volts, respectively. With an adjustable trip class of 5 to 30, it possesses both automatic and manual reset options. Its control circuit?s power consumption is rated at 3.9 watts, and this model supports panel mounting.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 193-EC5ZZ is an E3 plus overload relay designed and manufactured by Allen-Bradley/Rockwell Automation to provide overload protection to devices using measurement of true RMS current values of each phase current of the connected motor. Incorporated with six 24 VDC inputs, two Outputs, and DeviceLogix communication protocol and voltage monitoring, the E3 plus overload relay allows the gathering of earth fault data over the network. It offers two FLA settings for two-speed motor protection, incorporates zero-sequence sensing through the inherent 90 A rating for low-level earth fault detection, and offers adjustable trip and warning settings between 20 mA and 5 A. For devices rated above 90, A, as well as earth faults detection below 1 A, the external core balance current transformer accessory is necessary. Additionally, this overload relay model provides over-temperature protection to electric motors with accessories for terminating and monitoring the positive temperature coefficient thermistors embedded in the winding of the motor’s stator. Its thermal overload protection is achieved by configuring the motor’s full load current (FLC) rating and the expected trip class. Another feature of this overload device is the thermal memory circuit that approximates the level of thermal decay for a trip-class 30 setting. Allen-Bradley’s 193-EC5ZZ offers current imbalance trip and adjustable warning settings ranging from 10 to 100%. Additionally, this trip setting also has a trip delay time ranging from 0.1 to 25 seconds. It provides the capability to alert users before an impending overload trip as well as offers underload warning and trip settings adjustable between 10 and 100% FLA. It can be configured to operate single logic routines, can operate in both single and three-phase operations, and has status indicators to alert users of the different states of the device.
Question: Does Automation Stop offer repairs on the 193-EC5ZZ?
Answer: Yes. We offer repairs for the 193-EC5ZZ and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 193-EC5ZZ?
Answer: If you buy the 193-EC5ZZ through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 193-EC5ZZ online?
Answer: Yes. Automation Stop sells the 193-EC5ZZ online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 193-EC5ZZ?
Answer: The 193-EC5ZZ is made by Allen Bradley - Miscellaneous.
For additional information about 193-EC5ZZ check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 193-EC5ZZ.
Revision Part # | Also Known As | Availability |
---|---|---|
193-EC5ZZ/A | 193-EC5ZZ Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.