GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 193-ECM-ETR |
Series: | 193 |
UPC: | 885630525440 |
Description:
The 193-ECM-ETR E300 overload relay is a communication module that uses the Ethernet/IP network as communication interface. The Ethernet cable connector is male RJ45 to male RJ45 patch-cord whose voltage is rated at 600 volts and is shielded by foil and braiding and is made of polyvinyl chloride. It has a length of 1.9 meters. The device features smart motor control and has a selectable trip Class. The enclosure rating is IP20 offering protection against shock.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 193-ECM-ETR E300 overload relay serves as a circuit breaker by opening the switch in case of an electrical, thermal, or power overload. The overload relay contact is, therefore, normally closed and opens in case of an overload. It is a communication module type of overload relay whose real-time control, discrete information, and other high applicable applications are enabled by the Ethernet/IP network. The Ethernet cable has a foil and braided shield made of polyvinyl chloride material whose voltage rating is 600 volts and is 1.9 meters long. The Ethernet cable end connectors are male RJ45 to male RJ45 patch cord.
To increase the efficiency of the device by enhancing the voltage output, the overload relay features smart motor control which is also capable of detecting faults in the device. An advantage to using this particular communication module type, is that wiring is made easy and integration to Logix is simplified. It also has an integrated input/output. For single phase and three phase applications, information on diagnosis is made available and is enhanced. The length of time that the overload relay will take to open in case of an overload can be adjusted as the device features a selectable trip class.
The enclosure of the device is designed for indoor use as it offers no protection against infiltration by liquid. It however protects against shock that may be as a result of touch and prevents entrance of objects that are 12 millimeters in size since its IP rating is IP20. The device is also UL, CE, CSA, CCC and KCC certified.
Question: Does Automation Stop offer repairs on the 193-ECM-ETR?
Answer: Yes. We offer repairs for the 193-ECM-ETR and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 193-ECM-ETR?
Answer: If you buy the 193-ECM-ETR through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 193-ECM-ETR online?
Answer: Yes. Automation Stop sells the 193-ECM-ETR online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 193-ECM-ETR?
Answer: The 193-ECM-ETR is made by Allen Bradley - Miscellaneous.
For additional information about 193-ECM-ETR check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 193-ECM-ETR.
Revision Part # | Also Known As | Availability |
---|---|---|
193-ECM-ETR/A | 193-ECM-ETR Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.