GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 400-NX18 |
Series: | 400 |
Description:
Allen Bradley's 400-NX18 is an AC definite purpose contactor. It features 3 poles and a 50-ampere maximum load current. Its coils are rated at 120 volts AC nominal, 93 volts AC pickup voltage, 140/132 VA nominal inrush current at 50/60 hertz, 20/14 VA sealed current at 50/60 hertz, and 45 ohms nominal DC resistance. It has line and load terminals of box lug type and an insulation system of class B.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 400-NX18 is a modified alternating current (AC) definite purpose contactor by Allen Bradley. This product was designed to have a small size, allowing for space to be saved. For specific purpose devices, this contactor will meet or surpass any electrical and mechanical standards. It is a 3 pole contactor. It allows a maximum of 50 amperes of load current. Its coil has a nominal AC voltage rating of 120 volts with a frequency rating of 50 hertz to 60 hertz. The minimum pickup voltage needed by the coil is 93 volts AC. The coil can draw a nominal inrush current of 140 volt-amperes at 50 hertz and 132 volt-amperes at 60 hertz. The contactor coil can draw a sealed current of 20 volt-amperes at 50 hertz and 14 volt-amperes at 60 hertz. This device has a nominal DC resistance of 45 ohms to the load.
This contactor has box lug line/load terminals. It allows wire sizes of # 14 AWG to # 2 AWG. The mechanical life of this device is estimated to be 500,000 operations. Additionally, it has an electrical life of an estimated 250,000 operations. It comes with a standard arc cover. It also incorporates a 130 degree Celsius class B insulation system. It is recommended to operate within a temperature range of -40 degrees Celsius to +65 degrees Celsius (-40 to +150 degrees Fahrenheit). It can be mounted horizontally, as well as vertically. It weighs around 2 pounds. It also offers optional controller functions such as ring terminal and no quick-connect terminals on the line/load.
Question: Does Automation Stop offer repairs on the 400-NX18?
Answer: Yes. We offer repairs for the 400-NX18 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 400-NX18?
Answer: If you buy the 400-NX18 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 400-NX18 online?
Answer: Yes. Automation Stop sells the 400-NX18 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 400-NX18?
Answer: The 400-NX18 is made by Allen Bradley - Miscellaneous.
For additional information about 400-NX18 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 400-NX18.
Revision Part # | Also Known As | Availability |
---|---|---|
400-NX18/A | 400-NX18 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.