GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 42GRP-9070-Z13 |
Series: | 42GRP |
Description:
Designed and produced by the company known as Allen Bradley / Rockwell Automation, this device is a photoelectric sensor. It has a sensing distance of 3 meters. This device has a rated voltage of 10 to 40 volts. It has an input current rated at 30 milliamperes, while the load current of this device is rated at 250 milliamperes. This sensor has a response time of 2 milliseconds. This device is equipped with an LED indicator.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 42GRP-9070-Z13 photoelectric sensor was designed and produced by Allen Bradley, and it belongs to the Photoswitch Series 9000 product line. It is a long range diffuse with a sensing distance that is indicated as 3.0 meters (10 feet). The light emitting diode (LED) equipped to this device transmits the infrared rays whose wavelength is considered to be 880 nanometers. The voltage indicated for this photoelectric sensor is between 10 and 40 volts. This device features a NPN / PNP transistor. It has a load current rated at 250 milliamperes, whereas the input current is rated at 30 milliamperes. The leakage current is estimated to be 10 micro amperes. The device has a maximum power consumption rated at 4 volt-amperes, whereas the response time for the device is given as 2 milliseconds. This photoelectric sensor has a knob that can be simply adjusted to attain the required sensitivity.
The environmental conditions that are suitable for the proper functioning of the device includes a relative humidity that is between 5 percent to 95 percent and non-condensing, with temperatures being maintained between -34 and 70 degrees Celsius, especially when the device is in operation. The amount of both the vibration and shock that can be withstood by the photoelectric sensor is given as 10 hertz to 55 hertz at 1 millimeter amplitude and 30 G when the duration for the pulse is 1 millisecond. It has a 6.5-degree field of view. The yellow light on the LED indicator shows the power status, whereas the green LED light shows the output status. The red light shows the margin status.
Question: Does Automation Stop offer repairs on the 42GRP-9070-Z13?
Answer: Yes. We offer repairs for the 42GRP-9070-Z13 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 42GRP-9070-Z13?
Answer: If you buy the 42GRP-9070-Z13 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 42GRP-9070-Z13 online?
Answer: Yes. Automation Stop sells the 42GRP-9070-Z13 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 42GRP-9070-Z13?
Answer: The 42GRP-9070-Z13 is made by Allen Bradley - Miscellaneous.
For additional information about 42GRP-9070-Z13 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 42GRP-9070-Z13.
Revision Part # | Also Known As | Availability |
---|---|---|
42GRP-9070-Z13/A | 42GRP-9070-Z13 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.