GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 42SRP-6032-QD |
Series: | 42SRP |
Description:
Item number 42SRP-6032-QD is an Allen Bradly photoelectric sensor, part of the PHOTOSWICTH 6000 sensors family. This device is equipped with an inferred beam with a diameter of 880 nanometers and sensing mode sharp cut-off diffuse. The rated power supply is 24 volts DC and the sensing distance of this device ranges from at 5 millimeters (0.2 inches) to 76 millimeters (3 inches). This device has an LED indicator for sensor status and a 4-pin Micro QD connector.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 42SRP-6032-QD is a photoelectric sensor, manufactured by Allen Bradley. The device is part of the PHOTOSWITCH Series 6000 general purpose compact photoelectric sensors. The unit has an infrared sensing beam with a diameter of 880 nanometers. Its sensing mode is sharp cut-off diffuse, which is technology used in space limited areas for short range application. This device does not require a reflector and it is easy to install and align. This is particularly useful in conveyor applications, where the unit can detect moving items in one conveyor and disregards the items in the adjacent conveyor. The sensor operates at maximum margin in sensing distance from 5 millimeters (0.2 inches) to 76 millimeters (3 inches).
It has a power supply of 24 volts DC and can accept input range of 10 to 30 volts DC. The maximum current consumption is equal to 35 milliamperes. The unit has both PNP and NPN outputs and each of these outputs provides 200 milliamperes. The sensor operating mode is light operated. The output is ON energized in case the receiver sees sufficient light from the light source. The device response time will not exceed 1 millisecond. Its connector is of type 4-pin Micro QD. It has a LED indicator, which turns on red when the sensor output is activated and off dark when is output is off. To prevent the unit from excessive vibration malfunction, it is recommended to use supplementary mounting brackets. The sensor occupies a compact cylindrical package of 66 x 31.8 x 20.4 millimeters (2.60 x 1.25 x 0.81 inches).
Question: Does Automation Stop offer repairs on the 42SRP-6032-QD?
Answer: Yes. We offer repairs for the 42SRP-6032-QD and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 42SRP-6032-QD?
Answer: If you buy the 42SRP-6032-QD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 42SRP-6032-QD online?
Answer: Yes. Automation Stop sells the 42SRP-6032-QD online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 42SRP-6032-QD?
Answer: The 42SRP-6032-QD is made by Allen Bradley - Miscellaneous.
Question: What voltage is included with the 42SRP-6032-QD?
Answer: The Allen Bradley - Miscellaneous 42SRP-6032-QD includes a voltage of 10-30.
For additional information about 42SRP-6032-QD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 42SRP-6032-QD.
Revision Part # | Also Known As | Availability |
---|---|---|
42SRP-6032-QD/A | 42SRP-6032-QD Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.