GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440L-R4K0960YD |
Series: | 440L |
Description:
Part number 440L-R4K0960YD is a GuardShield receiver. This device can be used for both access and perimeter detection. This receiver can be used with the 440L-P4K0960YD GuardShield Sensor Pair and the 440L-T4K0960YD GuardShield transmitter. This receiver has a resolution of 30 millimeters. This device has a total of 48 beams. Additionally, this product has a rated protective height of 960 millimeters, or the equivalent of 37.79 inches. It requires a voltage rating of +24 volts DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 440L-R4K0960YD features the GuardShield Remote Teach. The protective height of this GuardShield receiver is nine hundred and sixty (960) millimeters. For aligning the GuardShield, operators are provided with a mounting bracket and an external laser. Both the receiver, part number 440L-R4K0960YD, and the transmitter, part number 440L-T4K0960YD, are essential parts of the GuardShield safety light curtain. Both the receiver and the transmitter come with the same protective height and resolution ratings. This device has a rated resolution of 30 millimeters. This receiver has a total of 48 beams. Part number 440L-R4K0960YD requires a voltage rating of +24 volts DC (direct current) to operate properly.
Just like every other receiver and transmitter, the 440L-R4K0960YD, and the 440L-T4K0960YD come with optical synchronization. For establishing a connection, users do not need any electrical connection between the receiver and the transmitter. The 440L-R4K0960YD comes with two (2) safety outputs: the first being the output signal switching devices, and the other being a non-safety auxiliary output. The switching capacity of the receiver is five hundred (500) milliamperes. The receiver and the transmitter must be connected in such a fashion that any hazard gets picked by only the protective field on the light curtain. The yellow indicator will light up when the interlock restart mode is activated.
The Allen Bradley 440L-R4K0960YD hosts the DIP switch settings menu, which is required to activate the floating blanking mode. Users need to use the default screwdriver to open the receiver's door. On top of the cascading receiver, you must use a termination plug.
Question: Does Automation Stop offer repairs on the 440L-R4K0960YD?
Answer: Yes. We offer repairs for the 440L-R4K0960YD and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440L-R4K0960YD?
Answer: If you buy the 440L-R4K0960YD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440L-R4K0960YD online?
Answer: Yes. Automation Stop sells the 440L-R4K0960YD online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440L-R4K0960YD?
Answer: The 440L-R4K0960YD is made by Allen Bradley - Miscellaneous.
For additional information about 440L-R4K0960YD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440L-R4K0960YD.
Revision Part # | Also Known As | Availability |
---|---|---|
440L-R4K0960YD/A | 440L-R4K0960YD Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.