GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440N-G02098 |
Series: | 440N |
Description:
Product number 440N-G02098 is a safety switch. This device was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This safety switch has two (2) normally closed (NC) safety contacts, as well as one (1) normally open (NO) auxiliary contact. This safety switch has an enclosure with a rating of IP67, NEMA 6P. The temperature of the area surrounding this device during operation should range from -10 to +55 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This module, the 440N-G02098, was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This device is a safety switch. Safety switches are usually used to open and close circuits as a means of disconnecting for service entry or to facilitate lock-out/tag-out procedures for motors and other critical power system equipment. This Allen Bradley safety switch module is an actuated safety switch, and it has two (2) normally closed (NC) externally fused and non-resettable safety contacts, along with one (1) normally open (NO) auxiliary contact. The safety contact switching capability of this device is rated at two hundred and fifty (250) volts alternating current (AC) with a rated current of two (2) amperes maximum.
The Allen Bradley 440N-G02098 safety switch has an enclosure with an Ingress Protection rating of IP67 and a NEMA rating of NEMA 6P. In addition to that, this module by Allen Bradley was designed with a six (6)-pin Micro QD connection. This device is capable of withstanding a shock rated up to fifty (50) G. Additionally, it can withstand a vibration rated up to 7 G at a frequency of 50 to 200 hertz. When operating this Allen Bradley safety switch, the temperature of the area surrounding this device should range from -10 degrees Celsius to +55 degrees Celsius, or the equivalent range off +14 degrees Fahrenheit to +131 degrees Fahrenheit. Furthermore, the relative humidity of the surrounding area should have levels that range from 5 percent to 95 percent. This device has an approximate weight of 85 grams, or 0.19 pounds.
Question: Does Automation Stop offer repairs on the 440N-G02098?
Answer: Yes. We offer repairs for the 440N-G02098 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440N-G02098?
Answer: If you buy the 440N-G02098 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440N-G02098 online?
Answer: Yes. Automation Stop sells the 440N-G02098 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440N-G02098?
Answer: The 440N-G02098 is made by Allen Bradley - Miscellaneous.
For additional information about 440N-G02098 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440N-G02098.
Revision Part # | Also Known As | Availability |
---|---|---|
440N-G02098/A | 440N-G02098 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.