GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440N-G02117 |
Series: | 440N |
Description:
Item number 440N-G02117 is a non-contact interlock switch without an actuator. This device was produced by Allen Bradley. The unit has a rated voltage of 250 volts AC, as well as a switching current of 2 amperes maximum. The unit has 2 normally closed (NC) contacts and 1 normally open (NO) contact. The physical dimensions of this device measure 33.5 mm x 78.5 mm x 16 mm. The approximate weight of this unit is 156 grams.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 440N-G02117 is a safety switch, manufactured by Allen Bradley. It belongs to the bulletin 440N product series and subgroup of Ferrogard GD2 Non-contact interlock switches. This group of switch devices features non-contact magnetic actuation and is capable to accept high misalignment tolerances. The 440N-G02117 contains the switch module without the actuator. The voltage input of this device is 250 volts AC, and the unit can sustain switching current up to 2 amperes. This device is equipped with 2 normally closed (NC) safety contacts and 1 normally open (NO) auxiliary contact. The connection is performed through a 3-meter (9.8 feet) FRS 21 GD2 cable.
The switch device housing is manufactured from stainless steel. It has been approved according to the safety standards ISO 14119, IEC 60947-5-3, ISO 13849-1 and IEC 62061. Depending on the application, this unit can be suitable for Performance Level e or d (PLe / PLd) and for use in SIL2 / SIL 3 systems, according IEC 62061. It has a safety classification of dual channel interlocks meeting Cat. 3 or Cat. 4 systems. The operating distance make on the safety contacts is 12 millimeters (0.47 inches) and 15 millimeters (0.59 inches) on the auxiliary switch. The operating distance break of the safety contacts is 23 millimeters (0.91 inches) and 26 millimeters (1.02 inches) on the auxiliary contact. The unit has an IP68, NEMA 6P enclosure. The temperature of the surrounding area during operation should remain within a range of -25 to 125 degrees Celsius, or -13 to 257 degrees Fahrenheit. The sensor has physical dimensions that measure 33.5 millimeters x 78.5 millimeters x 16 millimeters (1.32 inches x 3.09 inches x 0.63 inches). The weight of this device is approximately 156 grams, or 0.34 pounds.
Question: Does Automation Stop offer repairs on the 440N-G02117?
Answer: Yes. We offer repairs for the 440N-G02117 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440N-G02117?
Answer: If you buy the 440N-G02117 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440N-G02117 online?
Answer: Yes. Automation Stop sells the 440N-G02117 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440N-G02117?
Answer: The 440N-G02117 is made by Allen Bradley - Miscellaneous.
For additional information about 440N-G02117 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440N-G02117.
Revision Part # | Also Known As | Availability |
---|---|---|
440N-G02117/A | 440N-G02117 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.