GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440R-C23137 |
Series: | 440R |
UPC: | 10611320810117 |
Description:
The 440R-C23137 safety relay, developed and produced by Allen-Bradley, is a single-function screw/clamp type safety relay from the Guardmaster series. It features an output voltage range of 13 to 24 V and a current flow of 3 amps. The 440R-C23137 also has an output voltage range of 250V and 6 amperes current. This safety relay requires a power supply of 4 watts at 115 VAC with a frequency range of 50/60 Hz. It also includes a DIN rail mount, as well as screw or clamp functions.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 440R-C23137, manufactured by Allen-Bradley, is a safety relay device that is part of the Guardmaster series of products. It only performs a single function and needs a power supply with a voltage of 115 VAC as an input power source to operate. This safety relay is appropriate for use with light curtains and safety mats, among other applications. The capability of DIN rail mounting is generally required in this case. Additionally, it offers characteristics such as replaceable screw terminals and contract operation that is either typically open or closed. Manual reset operations are also available, with the option of being automated or manual. The torque settings characteristics of this module are accessible, as well as terminal screws ranging from 0.6 Nm to 0.8 Nm in diameter and length (5-7 lb. in). The vibration frequency is typically 10-55 Hz and 0.35 mm in length, according to the manufacturer. 0.2-2.5 mm conductor size or 24 -12 AWG rated cable is used in the construction of the relays. According to DIN EN 60204-1/VDE 0113 part 1, the safety relay may be used in safety circuits. The following safety standards are met to the greatest extent possible based on the operating mode and wiring. To evaluate whether the specifications of this device are acceptable for all expected operating and environmental features of the machine to which it is to be installed, a risk assessment should be carried out before its installation. In temperatures ranging from +5 °C to +55 °C, or 23 °F to 131 degrees Fahrenheit, this safety relay performs well. Humidity levels are acceptable up to 90 percent relative humidity, with an IP40 grade for enclosure protection (NEMA 1).
Question: Does Automation Stop offer repairs on the 440R-C23137?
Answer: Yes. We offer repairs for the 440R-C23137 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440R-C23137?
Answer: If you buy the 440R-C23137 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440R-C23137 online?
Answer: Yes. Automation Stop sells the 440R-C23137 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440R-C23137?
Answer: The 440R-C23137 is made by Allen Bradley - Miscellaneous.
For additional information about 440R-C23137 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440R-C23137.
Revision Part # | Also Known As | Availability |
---|---|---|
440R-C23137/A | 440R-C23137 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.