GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440R-N23126 |
Series: | 440R |
Description:
Designed and manufactured by the company known as Allen Bradley / Rockwell Automation, part number 440R-N23126 is a single-function safety relay that has a rated power supply voltage of 24 volts AC. This device operates at a frequency range of 50 to 60 hertz. This safety relay has a rated power consumption of 2 watts and an allowable input resistance of 110 ohms maximum. This device may be mounted via a 35 mm DIN rail. It weighs approximately 210 grams.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 440R-N23126 module was designed and produced by Allen Bradley / Rockwell Automation as a single-function safety relay. The list of electrical specifications for this module includes a rated power supply voltage of 24 volts alternating current (AC) / direct current (DC), as well as 115 volts AC and 230 volts AC. This device operates at a frequency range of 50 to 60 hertz. This single function safety relay module is also an appropriate choice for users when it comes to inspecting or monitoring emergency-stop circuits. This safety relay has a rated power consumption of 2 watts. It has an allowable input resistance of 110 ohms maximum. This safety relay can have a safety input configuration consisting of one (1) normally closed (NC) input, two (2) normally closed (NC) inputs or two (2) PNP light curtain inputs. This device has a mechanical life of ten million (10,000,000) cycles. This safety relay has a response time of 15 milliseconds, as well as a recovery time of 100 milliseconds. The impulse withstand voltage of this device is 2500 volts. The Allen Bradley 440R-N23126 single-function safety relay is equipped with three (3) LED status indicators. These status indicators are labeled PWR, CH1, and CH2. This relay has an operating temperature that ranges from -5 to +55 degrees Celsius, or the equivalent range of 23 to 131 degrees Fahrenheit. The relative humidity of the area surrounding this device should be 90%. This safety relay may be mounted via a 35 mm DIN rail. This device has an approximate weight of 210 grams.
Question: Does Automation Stop offer repairs on the 440R-N23126?
Answer: Yes. We offer repairs for the 440R-N23126 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440R-N23126?
Answer: If you buy the 440R-N23126 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440R-N23126 online?
Answer: Yes. Automation Stop sells the 440R-N23126 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440R-N23126?
Answer: The 440R-N23126 is made by Allen Bradley - Miscellaneous.
For additional information about 440R-N23126 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440R-N23126.
Revision Part # | Also Known As | Availability |
---|---|---|
440R-N23126/A | 440R-N23126 Ser A, Series A, Rev A | Request a Quote |
440R-N23126/B | 440R-N23126 Ser B, Series B, Rev B | Request a Quote |
440R-N23126/C | 440R-N23126 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.