GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 500F-BOD930 |
Series: | 500F |
Description:
The Allen Bradley 500F-BOD930 is a NEMA size 1, open base contactor with 3 poles and no overload. This contactor has a rated voltage of 600 volts AC, a continuous current rating of 27 amperes, and a 120-volt AC coil. The contactor operates at a 60 hertz frequency. Its maximum power rating is 7.5 horsepower for a single-phase motor voltage of 230 volts, as well as 7.5 Hp to 10 Hp for 3-phase motor voltages. The physical dimensions of this product measure 90.5 mm x 193 mm x 113 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 500F-BOD930 is a NEMA Size 1, open base contactor. The contactor has a rated voltage of 600 volts AC, a continuous current rating of 27 amperes, and a 120-volt AC coil. This contactor operates at a frequency of 60 hertz. Its maximum power rating is specified as 7.5 horsepower (Hp) at a single-phase motor voltage of 230 volts, and 7.5 horsepower to 10 horsepower for 3-phase motor voltages. It is characterized by 3 poles and has no overload.
The 500F-BOD930 base contactor is enclosed in a NEMA size 1 enclosure, with a mechanical life of up to ten million (10,000,000) operations. The NEMA size 1 enclosure is characterized by 8 auxiliary contacts, and average pick-up and drop-out times of 22 and 14 milliseconds, respectively. The enclosure also offers connection to cables of size 8 to 14 AWG, saddle or wire clamp type power terminals, and a 20 lb-inch torque requirement on power terminal wire clamps and pressure connectors/ lugs. Its power and auxiliary contacts are made of silver alloy and silver, respectively. The contactor must be operated in a vertical position and has an altitude rating of 10,000 feet before it begins to derate. The contactor has an operational temperature range of -13 to +149 degrees Fahrenheit (-25 to +65 degrees Celsius) when used with eutectic alloy starters and overload relay. The contactor is designed with anti-corrosive conductor and metal parts for a longer lifetime and efficient operation. Its physical dimensions are 90.5 mm x 193 mm x 113 mm. This product has an approximate weight of 3 pounds, or the equivalent of 1.4 kilograms.
Question: Does Automation Stop offer repairs on the 500F-BOD930?
Answer: Yes. We offer repairs for the 500F-BOD930 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 500F-BOD930?
Answer: If you buy the 500F-BOD930 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 500F-BOD930 online?
Answer: Yes. Automation Stop sells the 500F-BOD930 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 500F-BOD930?
Answer: The 500F-BOD930 is made by Allen Bradley - Miscellaneous.
For additional information about 500F-BOD930 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 500F-BOD930.
Revision Part # | Also Known As | Availability |
---|---|---|
500F-BOD930/A | 500F-BOD930 Ser A, Series A, Rev A | Request a Quote |
500F-BOD930/B | 500F-BOD930 Ser B, Series B, Rev B | Request a Quote |
500F-BOD930/C | 500F-BOD930 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.