GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 500FL-COD93 |
Series: | 500FL |
Description:
Part number 500FL-COD93 is a lighting contactor that belongs to the Bulletin 500 series of products. Designed and manufactured by Allen Bradley / Rockwell Automation, part number 500FL-COD93 has an open-type enclosure. This device is equipped with three (3) poles. This device has an inrush operating volt amperes burden of 240 VA, as well as a sealed operating volt amperes burden of 29 VA. The coil operating limits of this contactor is 85% to 110%.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 500FL-COD93 was designed and produced by the company known as Allen Bradley / Rockwell Automation. This device, which is a open-type lighting contactor, belongs to the Bulletin 500 series of products. This module is an electrically held contactor that can switch current to the incandescent filament, fluorescent, mercury arc lamps, capacitors, and other non-motor loads. This contactor should not be used on sign flashers. In the field, a normally open (NO) auxiliary contact for use as a hold-in contact can be added. This Allen Bradley module features (3) poles and has an operating volt amperes burden of inrush being two hundred and forty (240) VA, along with the sealed current being twenty-nine (29) VA at a frequency range of sixty (60) hertz. In addition to that, this module has a rated heat dissipation of up to five-point-nine (5.9) watts. Additionally, this Allen Bradley lighting contactor has coil operating limits of eighty-five (85) percent to one hundred and ten (110) percent. The Bulletin 500 line of contactors and starters are engineered to deliver exceptional performance in a wide range of applications. These load-life curves are based on testing performed in accordance with IEC 947-4 standards. This Allen Bradley lighting contactor has physical dimensions that measure 81 millimeters x 45 millimeters x 80.5 millimeters, or 3-3/16 inches x 1-25/32 inches x 3-11/64 inches (height x width x depth). This device has an approximate shipping weight of 0.45 kilograms.
Question: Does Automation Stop offer repairs on the 500FL-COD93?
Answer: Yes. We offer repairs for the 500FL-COD93 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 500FL-COD93?
Answer: If you buy the 500FL-COD93 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 500FL-COD93 online?
Answer: Yes. Automation Stop sells the 500FL-COD93 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 500FL-COD93?
Answer: The 500FL-COD93 is made by Allen Bradley - Miscellaneous.
Question: What voltage does the Allen Bradley - Miscellaneous 500FL-COD93 have?
Answer: The 500FL-COD93 includes a voltage of 600.
For additional information about 500FL-COD93 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 500FL-COD93.
Revision Part # | Also Known As | Availability |
---|---|---|
500FL-COD93/A | 500FL-COD93 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.