GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 505-BOD |
Series: | 505 |
Description:
The 505-BOD is an Allen-Bradley motor starter from the 505 series. Its coil volt range is 120 volts. It is NEMA size 1. The continuous current rating of this starter is 27 amperes, and its max output power is 10 Hp at 460 to 575 V. Additionally, it has three poles for the configuration and three phases. This starter is an open-style unit since it does not contain other significant enclosures.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 505-BOD is a NEMA reversing motor starter from the 505 product family that features motor starters. This product is also referred to as a eutectic alloy overload relay. This unit is a thermal device typically used for short circuit protection and is a suitable device for motor protection against overheating caused by excessive overcurrents. Likewise, it is useful for motor control systems in automation industries. Its primary components are concerned. It has three power poles for configuration and is a three-phase motor contactor. This motor starter operates on 600v and is rated on 27 amperage max continuous current. Its name rating is 1 and 120 coil voltage. This motor starter can draw a maximum of 7.5 horsepower at 200 VAC, while at 230 VAC, it can generate the same horsepower. In contrast, its horsepower rating is 480 to 575 VAC is 10. These power ranges increase and decrease following the normal-duty operations and heavy-duty. Aside from that, it is a magnetic AC contactor that is compatible with the 505 motor control systems. This eutectic alloy motor starter does not contain enough enclosures, so it is called open style. In addition, it weighs 8.90 lbs (9.5 pounds) and has dimensions of 14 x 12 x 8.5 inches. Besides that, it does not contain a battery, nor does it require one. Moreover, it is worth noting that the configuration of this unit should take place according to the guidelines of the manufacturer, and all the precautions are taken during its setup and operation.
Question: Does Automation Stop offer repairs on the 505-BOD?
Answer: Yes. We offer repairs for the 505-BOD and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 505-BOD?
Answer: If you buy the 505-BOD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 505-BOD online?
Answer: Yes. Automation Stop sells the 505-BOD online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 505-BOD?
Answer: The 505-BOD is made by Allen Bradley - Miscellaneous.
For additional information about 505-BOD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 505-BOD.
Revision Part # | Also Known As | Availability |
---|---|---|
505-BOD/A | 505-BOD Ser A, Series A, Rev A | Request a Quote |
505-BOD/B | 505-BOD Ser B, Series B, Rev B | Request a Quote |
505-BOD/C | 505-BOD Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.