GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 520F-DOD |
Series: | 520F |
Description:
Part number 520F-DOD is a multi-speed starter and was designed and produced by Allen Bradley / Rockwell Automation. This device belongs to the Bulletin 520F series of products. This module is equipped with two (2) eutectic alloy overload relay, as well as an open-type enclosure. This device has a continuous current rating of 90 amperes, an operating frequency of 60hertz, and a nominal coil voltage of 110 volts AC at 50 hertz and 120 volts at 60 hertz without a transformer.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 520F-DOD was designed and manufactured by Allen Bradley / Rockwell Automation. This NEMA size 3 multi-speed starter has a maximum power rating of 25 horsepower (Hp) at a motor voltage of 200 volts, 30 horsepower (Hp) at 230 volts, 50 horsepower (Hp) at 380 to 415 volts, and 50 horsepower (Hp) at 460 to 575 volts. This open-type starter can be supplied in vertical construction form, and with a number of overload relay eutectic alloy options. Also, this 3-phase starter requires 3 heater elements for each speed, has a service limit current rating of 104 amperes, has a maximum plugging and jogging duty 3-phase power rating of 15 horsepower (Hp) at 200 volts, 20 horsepower (Hp) at 230 volts, and 30 horsepower (Hp) at 380 to 575 volts. Additionally, it has a max circuit closing inrush peak current of 947 amperes. This device has an estimated lifecycle of 5 million operations and can accommodate a maximum of 8 auxiliary contacts. This product has an average pickup operating time of 37 milliseconds and 20 milliseconds for the dropout operating time.
The 520F-DOD requires a wire size of 8 to 1/0 AWG for its power terminals. The required torque on the power terminal wire clamps and pressure connectors/lugs is 150 pound-inch (lb-in). Additionally, this device is fitted with pressure type power terminals, uses silver alloy power contacts, as well as silver auxiliary contacts, and its wires are rated at 75 degrees Celsius. Furthermore, the operating temperature for this Allen Bradley device is -13 to +149 degrees Celsius.
Question: Does Automation Stop offer repairs on the 520F-DOD?
Answer: Yes. We offer repairs for the 520F-DOD and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 520F-DOD?
Answer: If you buy the 520F-DOD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 520F-DOD online?
Answer: Yes. Automation Stop sells the 520F-DOD online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 520F-DOD?
Answer: The 520F-DOD is made by Allen Bradley - Miscellaneous.
Question: What voltage does the 520F-DOD have?
Answer: The 520F-DOD has a voltage of 600.
For additional information about 520F-DOD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 520F-DOD.
Revision Part # | Also Known As | Availability |
---|---|---|
520F-DOD/A | 520F-DOD Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.