GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 592-EEFC |
Series: | 592 |
Description:
The EEFC is a solid-state overload relay module by Allen-Bradley/Rockwell Automation. The overload is used for intelligent tripping, current adjustments, and keeping the motor safe. The module has a manual and automatic reset button. This product is NEMA size 0 and is mountable on size 2 and 3 NEMA contactors. The selectable trip classes are 10, 15, 20, and 30. The overload can adjust current from 9 to 45 amperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 592-EEFC is an E1 Plus solid-state overload relay from the 592 series. Its overload type includes selectable trip classes of 10, 15, 20, 30 and is also selectable in auto and manual reset features. It can be mounted on NEMA contractors (0,1, and 2) sizes. Its current overload adjustment ranges from 9 to 45 amperes (for three-phase operation). This relay module can be mounted to NEMA contractors. Also, it contains various approvals and certifications such as IEC, IEC, CSA, UL, and cULus that are meant to validate devices for protection, safety, and performance. The main function of this overload relay module is to offer trip classes that are selectable from the 15 to 30 range. In addition, this relay also contains trip-free construction and enables easy selection of current ratings by enabling users to choose an appropriate heater element. Moreover, it comes with both the manual and automatic reset button functionality and is also available in NEMA configurations. Besides that, it also provides a clear way to observe optical indicators for visible trip indications. In a nutshell, this relay offers an excellent motor protection feature. It keeps the connected devices from short-circuiting by either warning the operators through its smart trip indications or even shutting down the power supply to avoid severe damage. Hence, the applicability of the overload relays for the motor loads and control technology is an important feature for automation. However, users should always remain cautious and avoid contaminants to damage the modules while also following the guidelines set by the makers.
Question: Does Automation Stop offer repairs on the 592-EEFC?
Answer: Yes. We offer repairs for the 592-EEFC and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 592-EEFC?
Answer: If you buy the 592-EEFC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 592-EEFC online?
Answer: Yes. Automation Stop sells the 592-EEFC online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 592-EEFC?
Answer: The 592-EEFC is made by Allen Bradley - Miscellaneous.
Question: What can I expect the voltage included with the 592-EEFC to be?
Answer: The 592-EEFC includes a voltage of 600.
For additional information about 592-EEFC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 592-EEFC.
Revision Part # | Also Known As | Availability |
---|---|---|
592-EEFC/A | 592-EEFC Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.